6" Split Kit

6" Split Kit speakers
Sort By:  
6" Split Kit 280W
R1,999.99
6" Split Kit VOCE Series 125w RMS
R4,999.99
6" Split Kit 80w RMS
R1,699.99
6" Component System 80w RMS
R1,499.99
Alpine SPG-17CS 6" Split Kit (SPG-17CS)
Alpine SPG-17CS 6" Split Kit

Built to Handle High Power The new Type-G Series of component and coaxial speakers are designed and built to handle high power levels. This speaker also delivers good sound quality, due to a soft dome tweeter, square voice coil wire with Kapton bobbin and an audio tuned capacitor.

FEATURES

Tweeter

  • Tweeter Type: 20mm Silk Soft Dome Tweeter
  • Application Type: Flush/Surface Swivel Mount
  • Magnet Material: Neodymium Magnet

Woofer

  • Cone Material: Polypropylene Cone Pearl Mica Injection
  • Voice Coil Type: Square Voice Coil Wire
  • Magnet: Ferrite Magnet
  • Frame: Injection Mold Frame
  • Design: Long Excursion Design

Crossover Network

  • Design: Separated Network Design Possibility
  • Attenuation Control: 3-Level
  • Mounting: Easy-Mount Screw Terminals

SPECIFICATIONS

Power Handling

  • Peak Power: 280 W
  • RMS Power: 70 W

Dimensions

  • Woofer Mounting Diameter: 14.1 cm
  • Woofer Mounting Depth: 6.1 cm

General

  • Frequency Response: 68 Hz to 20 kHz
  • Impedance: 4 Ω
  • Sensitivity: 88.5dB / W (1m)
6" Split Kit 280W
R1,999.99
Audison AVK6 VOCE 6" Splits (AVK6)
Audison AVK6 VOCE 6" Split Kit

The prestigious Eisa Award “European In-Car Speaker System 2010-2011” was bestowed to the AV K6 and AV K5 kits, which gather and comprise the most advanced technologies developed for the Audison components, at the service of music.
The whole R&D laboratory’s experience was poured into the design of these precious components, to create a synergy that can offer the highest quality sound in terms of bandwidth, dynamics of the musical message, naturalness and richness of details. The new reference for their own category.

Comp2 way System
Size165 mm (6.5") Woofer
28 mm (1"1/8) Tweeter
88,3 x 123 x 36 mm (3"1/2 x 4"13/16 x 1"7/16) Crossover
Power Handling125 W Continuous Power
250 W Peak Power
Impedance

4 Ω

Frequency Response50 - 22k Hz
Sensitivity91 dB/Spl
6" Split Kit VOCE Series 125w RMS
R4,999.99
XCELSUS XP6.2B (XP6.2B)
XCELSUS XP6.2B
6" Split Kit

Woofer size16,5 cm (6,5″)
Tweeter25 mm soft textile dome tweeter
Power handling capacity80 W RMS / 120 W max, 200 Watt peak power
Impedance4 ohm
Frequency range50 – 20.000 Hz
Crossover point (Hz)5500 Hz
Sensitivity88 dB (1W/1m)
Specifications
Woofer size16,5 cm (6,5″)
Tweeter25 mm soft textile dome tweeter
Power handling capacity80 W RMS / 120 W max, 200 Watt peak power
Impedance4 ohm
Frequency range50 – 20.000 Hz
Crossover point (Hz)5500 Hz
Sensitivity88 dB (1W/1m)
Outer diameter of woofer165 mm (6,5″)
Magnet size90 mm (3,54″)
Cone materialPaper / fibre composite mix
Mounting depth65mm ( 2,56″)
CrossoverSeparate filter box
Mounting hole145 mm (5,75″)
Size of filter box120 x 65 x 33 mm

image for illustration purposes only, actual product may differ from image
please call in to confirm pricing and availability
E&OE
6" Split Kit 80w RMS
R1,699.99
Hertz ESK165.5 Energy series 6" split kit (ESK165.5)
Hertz ESK165.5 Energy series 6" split kit

ESK 165.5 is a two-way car audio systems, employing the proprietary ET 26.5 tweeter, the EV 165.5 woofer and the specific CX 200.5 crossover, creating a combination of hi-tech products to ensure thrilling acoustic performance.
Excellent frequency response, high level of installation friendliness even with OEM placements, efficiency and appealing design: the Energy.5 systems comprise and contain the whole sound philosophy of Energy. Pure energy for listening pleasure.

Power Handling - Peak W300
Power Handling - Continuous W100
Impedance4
Frequency response Hz60 ÷ 23k
Sensitivity dB SPL93,5
Voice coil Ø mm (in.)25 (1)
Woofer size mm (in.)165 (6.5)
Tweeter size mm (in.)26 (1)
Woofer magnetHigh density flux ferrite
Tweeter magnetNeodymium
Woofer coneWater-repellent pressed paper
Tweeter domeTetolon
Crossover typeLP/HP
Crossover cut off3 kHz - 6/12 dB Oct.
6" split kit 100w RMS
R2,999.99
Hertz DSK165 6' Split Kit (DSK165)
Hertz DSK165 6' Split Kit
Dieci Series
Dieci car audio systems let you realize a high quality audio system with the utmost in simplicity. The woofers employ the exclusive V-cone® profile for amazing off-axis response and detailed mid-high range. The TPU (Thermoplastic polyurethane) surround ensures linearity and reduction of unwanted resonance, even at high excursion. High-performance materials, such as the neodymium motor assembly and the PEI membrane, ensure an extended high frequency range. The passive filters are found directly on the supplied connection cables, along with a rich array of accessories increasing the install-friendliness and installation time. - See more at: http://www.hertzaudiovideo.com/car-audio-systems-dieci-dsk165_3/#sthash.mNeJtrM7.dpuf
Dieci car audio systems let you realize a high quality audio system with the utmost in simplicity. The woofers employ the exclusive V-cone® profile for amazing off-axis response and detailed mid-high range. The TPU (Thermoplastic polyurethane) surround ensures linearity and reduction of unwanted resonance, even at high excursion. High-performance materials, such as the neodymium motor assembly and the PEI membrane, ensure an extended high frequency range. The passive filters are found directly on the supplied connection cables, along with a rich array of accessories increasing the install-friendliness and installation time. - See more at: http://www.hertzaudiovideo.com/car-audio-systems-dieci-dsk165_3/#sthash.mNeJtrM7.dpuf
Dieci car audio systems let you realize a high quality audio system with the utmost in simplicity. The woofers employ the exclusive V-cone® profile for amazing off-axis response and detailed mid-high range. The TPU (Thermoplastic polyurethane) surround ensures linearity and reduction of unwanted resonance, even at high excursion. High-performance materials, such as the neodymium motor assembly and the PEI membrane, ensure an extended high frequency range. The passive filters are found directly on the supplied connection cables, along with a rich array of accessories increasing the install-friendliness and installation time.
Power Handling - Peak W 160 Power Handling - Continuous W 80 Impedance4 Frequency response Hz 50 ÷ 23k Sensitivity dB SPL 93 Woofer size mm (in.) 165 (6.5) Tweeter size mm (in.) 24 (0.9) Woofer magnet High density flux ferrite Tweeter magnet Neodymium Woofer cone Water-repellent pressed paper Tweeter dome PEI Crossover type Hi Pass Crossover cut off 3,5 kHz @ 12 dB Oct. - See more at: http://www.hertzaudiovideo.com/car-audio-systems-dieci-dsk165_3/#sthash.mNeJtrM7.dpuf
Power Handling - Peak W 160 Power Handling - Continuous W 80 Impedance4 Frequency response Hz 50 ÷ 23k Sensitivity dB SPL 93 Woofer size mm (in.) 165 (6.5) Tweeter size mm (in.) 24 (0.9) Woofer magnet High density flux ferrite Tweeter magnet Neodymium Woofer cone Water-repellent pressed paper Tweeter dome PEI Crossover type Hi Pass Crossover cut off 3,5 kHz @ 12 dB Oct. - See more at: http://www.hertzaudiovideo.com/car-audio-systems-dieci-dsk165_3/#sthash.mNeJtrM7.dpuf
Power Handling - Peak W 160
Power Handling - Continuous W 80
Impedance Ω 4
Frequency response Hz 50 ÷ 23k
Sensitivity dB SPL 93
Woofer size mm (in.) 165 (6.5)
Tweeter size mm (in.) 24 (0.9)
Woofer magnet High density flux ferrite
Tweeter magnet Neodymium
Woofer cone Water-repellent pressed paper
Tweeter dome PEI
Crossover type Hi Pass
Crossover cut off 3,5 kHz @ 12 dB Oct
6" Component System 80w RMS
R1,499.99
Per Page      1 - 5 of 11