Amplifiers

Monoblock, , 2ch, 4ch & 5ch amplifiers

Sort By:  
Audio Processor
R4,499.99
8-Channel Digital DSP Amplifier
R15,999.99
mono block amp
R999.99
Complete Amplifier wiring kit
R249.99
8000W Digital Monoblock
R2,199.99
Monoblock amplifier 6000w
R1,199.99
4ch amplifier 6400w
R1,499.99
14000W Digital Monoblock
R3,499.99
Powerbass 4.140 6000w 4ch amp 1500W x 4
R1,749.99
5 Ch amplifier 4 channel + mono
R6,999.99
Audison bit Ten (bit Ten)
Audison bit Ten
Audio Processor

bit Ten is a multi-function digital processor featuring analog input, capable of transforming ordinary OEM or after-market system into a high-performance system.
Provided with a 32 bit, 147 MHz clock speed DSP as well as 24 bit A/D and D/A converters, bit Ten is controlled by a software especially developed for signal treatment according to the vehicle acoustic peculiarities. Setting the parameters of each input single channel, setting the delays according to the listening position, adjusting crossovers and equalizers for each of the 5 output channels; all of these operations can be managed by the PC.During the installation phase, after converting the analog signal into digital, bit Ten automatically reconstructs a digital full-bandwidth stereo signal; de-equalizes the frequency response and, if necessary, reconstructs the central and subwoofer channels.The user can configure the output mode of each channel relative to the installed system.

Analog Inputs4 high lev. + 2 pre in
Digital InputsNot available
Analog Outputs5
Digital OutputsNot available
Equalizers for each Outputs31-band graphic equalizer (1/3 Oct.; ±12dB)
Crossover Filter TypeFull / Hi-Pass / Low Pass / Band Pass
Filter mode and slopeLinkwitz @ 12 / 24
Butterworth @ 6 / 12 / 18 / 24
DE-EQ

De-equalization function to “flatten” any equalization applied by default by OEM sources.

BIT DRIVE

Auto tuning by Audison bit Tune and communication with bit Drive portal.


images for illustration purposes only, acyual product may differ from image
subject to stock availability
please call in or visit the store to confirm pricing and availability
E&OE
Audio Processor
R4,499.99
Alpine PDP-E800DSP (PDP-E800DSP)
Alpine PDP-E800DSP
8-Channel Digital DSP Amplifier

Alpine introduces the all-new PDP-E800DSP Digital DSP amplifier. This amazing all-in-one solution allows sound upgrading for virtually any vehicle with its incredible versatility and connectivity options.

Featuring 6 input channels (both pre-amp and speaker level), as well as up to 8 fully configurable output channels allow for a very wide range of system applications and flexibility. Tune your sound with a professional 240-band Parametric EQ, 8 channel digital time correction, as well as a 8 channel digital crossover.

For system setup, use the Alpine PC software to connect wirelessly or via USB to the PDP-E800DSP. The very intuitive and easy-to-use software allows for full control over all settings and displays all data in a very nice graphical user interface.

The free-of-charge Alpine Remote Control for PDP-E800DSP app (available for both Android and iPhone) lets you control your DSP amp on the go and includes the most important functions, such as master-volume, subwoofer level, source selection, pre-set recall and more.

The PDP-E800DSP is the perfect solution especially for OEM upgrades, where the factory radio can’t be replaced by an after-market solution to get better sound. The Alpine DSP amp simply adds-on to the existing OEM system, allowing you to build any sound system around your factory system.

Build your speaker system

You can freely configure the 8 output channels to your needs. Each channel delivers 100 Watts @ 4 Ohms (but limited to 700 Watts total output) and can be configured to be used as a tweeter, midrange, centre or woofer channel. You can also use two channels in parallel for a powerful 200 Watts subwoofer channel. The PDP-E800DSP includes digital crossovers, so you do not need to worry about installing passive crossovers all over the car. With a 20Hz to 22kHz frequency response range for all channels, you can build virtually any system you can think of.

Highest connection versatility and flexibility

The PDP-E800DSP is extremely versatile and flexible – it can be added-on to virtually any factory or aftermarket car entertainment system to build the sound system you require. Connect the DSP amp to your factory system through the 6-channel speaker-level inputs with remote sensing, or alternatively, use the 6-channel pre-amp inputs (RCA). There is also an Optical input (max 24bit / 96kHz) to connect additional sources

Pure Class-D technology

The Alpine DSP amp uses Class-D amplification technology: this means once an analogue input signal is converted to digital, it remains fully digital throughout the entire processing and amplification stage. With Class-D technology, an amplifier can reach much higher efficiency - meaning less heat production and therefore a much smaller heat-sink. This results in a very small, compact housing, that can be easily placed somewhere in the vehicle (205mm x 150mm x 50mm).

Wireless audio playback

If you use an Android phone, you can use the micro USB connection on the Alpine PDP-E800DSP to transfer and enjoy lossless audio files in full bandwidth. You can also connect your phone to the DSP amp using WiFi (wireless module is included with the PDP-E800DSP). We recommend to use the USB Audio Player Pro app for Android.

240-band Parametric EQ and X-Over

The Parametric EQ is very easy to use: 30 bands per channel can be simply adjusted with sliders in real-time. The display gives you visual feedback of your adjustments. You can also set the digital X-Over for all 8 channels separately (HP, LP, BP 6/12/18/24dB/30dB, type of filter Butterworth, Bessel, Chebyshev selectable). There is also a Phase Inversion (0,180) possible.

GENERAL

  • 6 high-level inputs for OEM system integration
  • 6 analog Pre-Amp inputs (RCA) for aftermarket head unit connectivity
  • 1 digital TOSLINK/SPDIF input
  • Up to 8 speaker outputs with high power rating
  • 110dB signal-to-noise ratio (digital input)
  • Channel separation > 75dB
  • USB Device input for DSP setup by PC
  • Wireless connection with separate module (amp setup) for PC only, or wireless audio streaming (smart phone or PC))
  • Class-D amplifier with fully digital audio path
  • ADCs by Burr Brown
  • Remote app for iOS and Android with basic control functions (Master level, Sub level, Preset recall, source selection)
  • Pre-amp output (copy from channel 8, for external sub woofer amp)

AMP

  • BurrBrown A/D conversion
  • Full digital audio path
  • High output power capability
  • Total power 700 Watt RMS at 4 Ω
  • 100 Watt per channel at 4 Ω
  • 120 Watt per channel at 2 Ω
  • 200 Watt at 2 Ω (2 channels in parallel mode)
  • Advanced diagnostics for each output channels (shortcut, overheat, clipping)
  • Start-Stop Engine compatible
  • Load Capability: 4 – 2 Ω
  • Parallelized output supported

DSP

  • Latest Analog Device chip (ADAU1452)
  • Up to 8 speaker outputs with independent adjustable output level
  • Independent or linkable setups for all output channels
  • Delay on each channel up to 14,57ms, 0.01msec steps
  • 30-band Graphic Equalizer per channel with configurable frequency, Q (from 1 up to 15) and Gain (-10dB /+10 dB)
  • Digital X-Over for each channel (HP, LP, BP) 6/12/18/24dB/30dB, type of filter (Butterworth, Bessel, Chebyshev) selectable
  • Phase Inversion (0,180)
  • Master Volume (0 – 42dB)
  • Sub control (0 - 15 dB)
  • Possibility to save/load up to 6 presets on DSP
  • Settings can be secured by certificates
  • Free adjustable analog routing (example: channel mixing for center channel or 3-way input signal)
  • EQ ON/OFF possible (for each channel)
  • Delay grouping for easier TCR adjustment (up to 4 groups possible)
  • TCR ON/OFF for each channel possible
  • TCR help calculation for beginners
  • Overview page for all settings
  • Live monitor (for battery voltage and amp temperature)
  • Turn ON by signal or wire
  • Alpine RUX-KNOB2 ready (master volume or sub level)
  • Additional gain on analog input (+6; +9db ). For sources with lower pre-amp level than 2 Volts

images for illustration purposes only, actual product may differ from image
please call in or visit the store to confirm pricing and availability
E&OE
8-Channel Digital DSP Amplifier
R15,999.99
Predator PR3800.1D (PR3800.1D)
Predator PR3800.1D

1 channel MONO Block amplifier
3800w
Class D amp
1 OHM Stable
Overload protection



E&OE
image for illustration purposes only, actual product may differ from image
please call in or come into the store to verify stock availability & pricing
mono block amp
R999.99
8g Wiring Kit (8g wiring kit)
Wiring kit for an amplifier
contains:
2 - 2 Male RCA Cables
8g Power Cable
8g Ground Cable
Remote Wire
Fuse Holder + Fuse
Speaker Cable
Terminals

***Image for illustration purpose only***
***Contents of kit may differ in colour***
***Contents may vary per manufacturer pack***
Complete Amplifier wiring kit
R249.99
Powerbass PB1.2200D 8000w monoblock (1.2200D)
8000W Digital Monoblock

*image for illustration purpose only*
E&OE
8000W Digital Monoblock
R2,199.99
Star Audio M400 (M400)
Staraudio M400
6000w Monoblock Amplifier

MONO BLOCK
MOSFET POWER AMPLIFIER
1 CHANNEL
2 OHM STABLE
ADJUSTABLE HIGH PASS AND LOW PASS FILTER
VARIABLE BASS BOOSTER
TRI-MODE OUTPUT CONFIGURATION


images for illustration purposes only, actual product may differ from image
please call in or visit the store to confirm pricing and availability
E&OE
Monoblock amplifier 6000w
R1,199.99
Targa TA-T6400.4 (TA-T6400.4)
Targa TA-T6400.4
4 channel 6400w amplifier

Low pass filter (variable) - 50Hz-250Hz
High pass filter (variable) - 120Hz-3KHz
Frequency response (-1 dB) - 10Hz - 250Hz
Signal to noise ratio - >90 dB
Input sensitivity - 200mV-6V
Input impedance - 2k Ohm
Speaker impedance - 4 Ohm
Fuse rating - 25A x2
Dimensions (mm) - 320x240x55


images for illustration purposes only, actual product may differ from image
please call in or visit the store to confirm pricing and availability
E&OE
4ch amplifier 6400w
R1,499.99
Powerbass PB1.4400D 14000w monoblock (1.4400D)
Powebass PB1.4400D

14000W Digital Monoblock
Frequency Response: 10Hz - 250Hz
Input Sensitivity: 0.2-0.6V
Signal to Noise Ratio: >95dB
THD%: <0.1%
Variable High-Pass: N/A
Variable Low-Pass: 35Hz - 250Hz
Variable Subsonic Filter: 15Hz - 35Hz
45Hz Bass boost: 0-18dB
Input (RCA Jack)
Bass Boost Remote Control


*image for illustration purpose only*
please call in or visit the store to confirm pricing & availability
E&OE
14000W Digital Monoblock
R3,499.99
Powerbass 4.140 6000w 4ch amp (PB4.140)
4 x 1500w Max Output Power
2 Ohm Stable
Tri-mode Operation
2/4 Channel Selection Circuit
Bridgeable 4/3/2 Channel Mode
Adjustable Input Sensitivity
Infinitely Adjustable High pass and Low pass Filter
Variable Bass Booster
Thermal/Short-circuit / Overloading protection
Automatic switching off and on via car radio
Power on and Protection LED Indicators
Mute Circuit for suppressing switch on crackle interference
High Efficient Mosfet Power Supply

*image for illustration purpose only*
E&OE

please call in or come into the store to confirm pricing and stock availability
Powerbass 4.140 6000w 4ch amp 1500W x 4
R1,749.99
Alpine MRV-V500 (MRV-V500)
Alpine MRV-V500

4 Channel + Mono Digital V-Power Amplifier

Tens of thousands have relied on V-Power amplifiers for dependable, quality power. Now in their fourth generation, V-Power amplifiers carry on this heritage and prove that playing strong never looked our sounded better. Yes, it is possible to improve upon a good thing.

Proven Power

Each V-Power amplifier comes with its very own birth-sheet. V-Power amplifiers are tested and documented to show their true actual output.

Dual Feedback Modulation

Dual internal error correction technology – which had previously only been available in the PDX and X-Power amplifiers, is now integrated in V-Power mono amplifiers. The audio input signal is analysed, compared, and corrected twice dynamically as the signal is processed through the amplifier. The result is amplifiers with the widest frequency response, higher damping factor, and lowest noise in its class.

Big Power, Small Package

V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space.

Max Power Output Ratings

  • Total Max Power: 1100 W
  • RMS Power Ratings
  • Per channel into 4 Ohms: CH 1-4 (@14.4V ≤1%THD+N) 40W x 4
  • Per channel into 4 Ohms: Subwoofer (@14.4V ≤1%THD+N) 150W x 1
  • Per channel into 2 Ohms: CH 1-4 (@14.4V ≤1%THD+N) 60W x 4
  • Per channel into 2Ohms: Subwoofer (@14.4V ≤1%THD+N) 250W x 1
  • Bridged into 4ohms, 14.4V (@14.4V ≤1%THD+N) 120W RMS x 2

Sound Tuning

  • Crossover (CH-1/2 and CH-3/4, HPF): 50 - 400 Hz , -12 dB/oct.
  • Crossover (Subwoofer, LPF): 50 - 400 Hz, -24 dB/oct.
  • Equalizer (Bass EQ): 0 to +12dB (Subwoofer, fc=50Hz) Variable

images for illustration purposes only, actual product may differ from image
please call in to confirm pricing and availabelity
E&OE
5 Ch amplifier 4 channel + mono
R6,999.99
Per Page      1 - 10 of 26