Amplifiers

Monoblock, , 2ch, 4ch & 5ch amplifiers

Sort By:  
Monoblock amplifier 1200W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)
R6,299.99
8000W Digital Monoblock
R2,199.99
Alpine Monoblock 650 Watts x 1 into 4Ω 1100 Watts x 1 into 2Ω
R5,499.99
20000W Digital Monoblock
R4,999.99
Alpine MRV-M1200 (MRV-M1200)
Alpine MRV-M1200

CARRYING ON THE V-POWER’S REPUTATION OF VALUE AND RELIABILITY

Don’t let its small size fool you, this amplifier was specifically engineered to offer performance, sound quality and reliability – all meeting Alpine’s high standards.

Power Rating; 600W RMS x 1 (4Ω, 14.4V, ≤1% THD+N), 1200W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)


RAISING THE BAR

The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.

BIG POWER, SMALL PACKAGE

V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space.

ENHANCED SHUT DOWN PERFORMANCE

No shut down! You get longer time until protection mode kicks in. It is a gradual gain down, no abrupt interruptions in playback.

GREATER HEAT PROTECTION

Greatly improved heat sink capacity for improved shutdown performance. The MRV-M1200’s heat sink is over 30% larger in volume than that of its predecessor, the MRX-M110.

REMOTE BASS LEVEL ADJUSTMENT

Adjust the subwoofer level without having to access the amplifier itself. Simply use the enclosed RUX-KNOB bass knob and get full control for remote on-the-fly bass adjustments. You also have the ability to control up to ten V-Power mono amps from just one RUX-KNOB controller with simple telephone jack adapters. The RUX-KNOB is compatible with all Mono and 5-channel V-Power models.

PROVEN POWER

Each V-Power amplifier comes with its very own birth-sheet. V-Power amplifiers are tested and documented to show their true actual output.

SPECIFICATIONS

CEA-2006 Power Ratings

  • CEA-2006 Power Rating: 600W RMS x 1 (4-ohm, 14.4V at <1% THD+N)

RMS Power Ratings

  • Per channel into 4 Ohms: 600W RMS x 1 (14.4V at <1% THD+N)
  • Per channel into 2 Ohms: 1200W RMS x 1 (14.4V at <1% THD+N)

Sound Tuning

  • Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct.
  • EQ (Equalizer): 0 to +12dB, fc=50Hz

Dimensions

  • Foot Print (WxHxD) mm: 342 x 55 x 219 mm
  • Foot Print (WxHxD) in: 13-1/2'' x 2-1/4'' x 8-5/8''

General

  • Power Requirements: 14.4 V.DC (11-16V allowable)
  • Input Sensitivity (RCA Input): 0.15 - 4.0 V
  • Input Sensitivity (Speaker Level Input): 0.4 - 10 V
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz
  • THD+N (10W into 4 Ohms): ≤0.02 %
  • THD+N (10W into 2 Ohms): ≤0.03 %
  • THD+N (Rated Power into 4 Ohms): ≤0.2 %
  • THD+N (Rated Power into 2 Ohms): ≤0.3 %
  • Damping Factor (10W into 4 Ohms at 100Hz): >750
  • Signal to Noise (1W into 4 Ohms): >85 dB
  • Signal to Noise (Rated Power into 4 Ohms): >105 dB
  • Preamp Output: 4.0V Max.
  • Remote Level: -20 to 0 dB
  • Weight: 1.8 kg

Monoblock amplifier 1200W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)
R6,299.99
Powerbass PB1.2200D 8000w monoblock (1.2200D)
8000W Digital Monoblock

*image for illustration purpose only*
E&OE
8000W Digital Monoblock
R2,199.99
Alpine MRX-M110 (MRX-M110)
The New X-Power amplifiers offer the best performance in their class, redefining expectations in the affordable amplifier category. Thanks to trickle-down technology, our in-house engineering team has taken many of the patent-pending technologies introduced in the industry-leading PDX series and implemented them in the new X-Power amplifiers. The X-Power amps provide you with the absolute widest bandwidth, best signal-to-noise, lowest distortion and highest damping factor of any amplifier in their class.
  • 650 Watts x 1 into 4Ω
  • 1100 Watts x 1 into 2Ω
  • Class-D, Best Dollar-Per-Watt Performance
  • PDX Technology Inside
  • Sleek Aggressive Design w/ End Caps
  • Voltage ON/OFF Sensing, Non-Fading Speaker-Level Inputs for OEM Upgrade
  • Built-in Crossover, Bass EQ, and Subsonic Filter
  • Remote Bass (RUX-KNOB) Compatible
  • Extremely Low Noise and Distortion
  • Extremely High Damping Factor
  • Reliable No-Shutdown Design
Alpine Monoblock 650 Watts x 1 into 4Ω 1100 Watts x 1 into 2Ω
R5,499.99
Powerbass PB1.8800D 20 000w monoblock (1.8800D)
Powerbass PB1.8800D
20000W Monoblock amplifier
Frequency Response: 10Hz - 250Hz
Input Sensitivity: 0.2-0.6V
Signal to Noise Ratio : 95dB
THD%: 0.1%
Variable Hi-pass: N/A
Variable Low-Pass: 35Hz - 250Hz
Variable Subsonic Filter: 15Hz - 35Hz
45Hz Bass Boost: 0-18dB


*image for illustration purpose only*
E&OE
20000W Digital Monoblock
R4,999.99
pb2.120
Powerbass PB2.120 3000w 2ch amp (PB2.120)
Powerbass PB2.120 3000w 2ch amp

*Image for illustration purpose only*
E&OE
3000w 2ch amp
R999.99
Per Page      6 - 10 of 21