ALPINE

Sort By:  
5" 2 way co-axial speakers 200w
R1,199.99
4 channel 600w amplifier
R2,199.99
Monoblock amplifier 1200W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)
R6,299.99
6" Split Kit 280W
R1,999.99
Alpine SPG-13C2 5" co-axial speakers (SPG-13C2)
Alpine SPG-13C2 5" co-axial speakers
Built to Handle High Power The new Type-G Series of component and coaxial speakers are designed and built to handle high power levels. This speaker also delivers good sound quality, due to a soft dome tweeter, square voice coil wire with Kapton bobbin and an audio tuned capacitor.

FEATURES

Tweeter

  • Tweeter Type: 20mm Silk Soft Dome Tweeter
  • Magnet Material: Neodymium Magnet

Woofer

  • Cone Material: Polypropylene Cone Pearl Mica Injection
  • Voice Coil Type: Square Voice Coil Wire
  • Magnet: Ferrite Magnet
  • Frame: Injection Mold Frame
  • Design: Long Excursion Design

SPECIFICATIONS

Power Handling

  • Peak Power: 200 W
  • RMS Power: 50 W

Dimensions

  • Woofer Mounting Diameter: 11.0 cm
  • Woofer Mounting Depth: 4.3 cm

General

  • Frequency Response: 82 Hz to 20 kHz
  • Impedance: 4 Ω
  • Sensitivity: 87.5dB / W (1m)
5" 2 way co-axial speakers 200w
R1,199.99
Alpine SXE-1006TW tweeters (SXE-1006TW)
Alpine SXE-1006TW Mylar-Titanium Balanced Dome Tweeter is a great value upgrade for any sound system. Its compact design makes for easy installation. You will benefit from the addition of directional control and enjoy enhanced treble response.

  • Mylar-Titanium Balanced Dome Tweeter
  • Neodymium Motor (½ inch, 13mm)
  • Inbuilt passive x-over [-6db/oct.]
  • Installation Accessories Included

Power Handling

  • Peak Power: 280 Watts
  • RMS Power: 45 Watts

Dimensions

  • Tweeter Mounting Diameter: 30 mm
  • Tweeter Mounting Depth: 17,5 mm

General

  • Frequency Response: 4kHz - 20kHz
  • Sensitivity: 88dB SPL (1W@1m)
280w tweeters
R699.99
Alpine BBX-F1200 (BBX-F1200)
Alpine BBX-F1200

This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system.

High Power, Great Value

This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget.

High Pass and Low Pass Filters

These two filters let you set the frequency points for the high, mid and bass ranges to match your speakers and ensure optimum efficiency.

FEATURES

Install

  • Terminal Layout: Two-Sided
  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

  • Amplifier Type: Class-A/B
  • Channel Design: 4/3/2 Channel
  • Thermal Control: Thermal Management Control
  • Power Supply: DC-DC PWM Power Supply
  • Power Supply Design: MOSFET Power
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Crossover: Variable Low-Pass / High-Pass
  • Green/red status LED
  • 2 pair RCA pre-inputs

SPECIFICATIONS

Max Power Output Ratings

  • Total Max Power: 600W

RMS Power Ratings

  • Per Channel into 4ohms (≤1%THD+N): 4 x 50W
  • Per Channel into 2ohms (≤1%THD+N): 4 x 70W
  • Bridged into 4ohms (≤1%THD+N): 2 x 130W

Sound Tuning

  • Crossover Frequency (Variable, OFF/LPF/HPF Selectable)
    1/2 Ch: LP/HP:  50Hz – 500Hz
    3/4 Ch: LP/HP:  50Hz – 500Hz
  • EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain  0dB to +12dB (3/4 Ch only)

Dimensions

  • Footprint: 330 mm x 52 mm x 240 mm

General

  • Power Requirements: 14.4 V DC (11 V to 16 V)
  • Input Sensitivity: 0.2 - 8.0 V
  • Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
  • Speaker Impedance: 4 or 2 Ω
  • Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB
  • Weight: 2.7 Kg
4 channel 600w amplifier
R2,199.99
Alpine MRV-M1200 (MRV-M1200)
Alpine MRV-M1200

CARRYING ON THE V-POWER’S REPUTATION OF VALUE AND RELIABILITY

Don’t let its small size fool you, this amplifier was specifically engineered to offer performance, sound quality and reliability – all meeting Alpine’s high standards.

Power Rating; 600W RMS x 1 (4Ω, 14.4V, ≤1% THD+N), 1200W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)


RAISING THE BAR

The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.

BIG POWER, SMALL PACKAGE

V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space.

ENHANCED SHUT DOWN PERFORMANCE

No shut down! You get longer time until protection mode kicks in. It is a gradual gain down, no abrupt interruptions in playback.

GREATER HEAT PROTECTION

Greatly improved heat sink capacity for improved shutdown performance. The MRV-M1200’s heat sink is over 30% larger in volume than that of its predecessor, the MRX-M110.

REMOTE BASS LEVEL ADJUSTMENT

Adjust the subwoofer level without having to access the amplifier itself. Simply use the enclosed RUX-KNOB bass knob and get full control for remote on-the-fly bass adjustments. You also have the ability to control up to ten V-Power mono amps from just one RUX-KNOB controller with simple telephone jack adapters. The RUX-KNOB is compatible with all Mono and 5-channel V-Power models.

PROVEN POWER

Each V-Power amplifier comes with its very own birth-sheet. V-Power amplifiers are tested and documented to show their true actual output.

SPECIFICATIONS

CEA-2006 Power Ratings

  • CEA-2006 Power Rating: 600W RMS x 1 (4-ohm, 14.4V at <1% THD+N)

RMS Power Ratings

  • Per channel into 4 Ohms: 600W RMS x 1 (14.4V at <1% THD+N)
  • Per channel into 2 Ohms: 1200W RMS x 1 (14.4V at <1% THD+N)

Sound Tuning

  • Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct.
  • EQ (Equalizer): 0 to +12dB, fc=50Hz

Dimensions

  • Foot Print (WxHxD) mm: 342 x 55 x 219 mm
  • Foot Print (WxHxD) in: 13-1/2'' x 2-1/4'' x 8-5/8''

General

  • Power Requirements: 14.4 V.DC (11-16V allowable)
  • Input Sensitivity (RCA Input): 0.15 - 4.0 V
  • Input Sensitivity (Speaker Level Input): 0.4 - 10 V
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz
  • THD+N (10W into 4 Ohms): ≤0.02 %
  • THD+N (10W into 2 Ohms): ≤0.03 %
  • THD+N (Rated Power into 4 Ohms): ≤0.2 %
  • THD+N (Rated Power into 2 Ohms): ≤0.3 %
  • Damping Factor (10W into 4 Ohms at 100Hz): >750
  • Signal to Noise (1W into 4 Ohms): >85 dB
  • Signal to Noise (Rated Power into 4 Ohms): >105 dB
  • Preamp Output: 4.0V Max.
  • Remote Level: -20 to 0 dB
  • Weight: 1.8 kg

Monoblock amplifier 1200W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)
R6,299.99
Alpine SPG-17CS 6" Split Kit (SPG-17CS)
Alpine SPG-17CS 6" Split Kit

Built to Handle High Power The new Type-G Series of component and coaxial speakers are designed and built to handle high power levels. This speaker also delivers good sound quality, due to a soft dome tweeter, square voice coil wire with Kapton bobbin and an audio tuned capacitor.

FEATURES

Tweeter

  • Tweeter Type: 20mm Silk Soft Dome Tweeter
  • Application Type: Flush/Surface Swivel Mount
  • Magnet Material: Neodymium Magnet

Woofer

  • Cone Material: Polypropylene Cone Pearl Mica Injection
  • Voice Coil Type: Square Voice Coil Wire
  • Magnet: Ferrite Magnet
  • Frame: Injection Mold Frame
  • Design: Long Excursion Design

Crossover Network

  • Design: Separated Network Design Possibility
  • Attenuation Control: 3-Level
  • Mounting: Easy-Mount Screw Terminals

SPECIFICATIONS

Power Handling

  • Peak Power: 280 W
  • RMS Power: 70 W

Dimensions

  • Woofer Mounting Diameter: 14.1 cm
  • Woofer Mounting Depth: 6.1 cm

General

  • Frequency Response: 68 Hz to 20 kHz
  • Impedance: 4 Ω
  • Sensitivity: 88.5dB / W (1m)
6" Split Kit 280W
R1,999.99
Per Page      6 - 10 of 35