ALPINE

Sort By:  
Alpine SXE-1325s 5" 2 way co-axial speakers RMS Power 35W
R649.99
MRV-M250
250W RMS x 1 (2Ω, 14.4V, ≤1% THD+N) 150W RMS x 1 (4Ω, 14.4V, ≤1% THD+N)
R2,499.99
MRV-F300
75W RMS x 4 (2Ω, 14.4V, ≤1% THD+N) 50W RMS x 4 (4Ω, 14.4V, ≤1% THD+N)
R3,499.99
Alpine SBG-1044BR 10" Sub in a box
R2,199.99
Mono V-Power Digital Amplifier 500W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)
R3,299.99
Alpine SXE-1325s 5" 2 way co-axial speakers (SXE-1325s)

  • Peak Power 200W
  • RMS Power 35W
  • Frequency Response: 70Hz-20kHz
  • Sensitivity: 92dB/W/m
  • Neodymium Magnet
  • Mylar-Titanium Balanced Dome Tweeter
  • Ferrite Magnet
  • Long Fibre Natural Pulp Cone
  • High Polymer Foam Edge
Alpine SXE-1325s 5" 2 way co-axial speakers RMS Power 35W
R649.99
MRV-M250
Alpine MRV-M250 (MRV-M250)

Raising the Bar

The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.

Big Power, Small Package

V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space.

Keep the Music Playing

The V-Power amplifiers provide reliable, stable thermal performance. They use a new, higher efficiency design to achieve non-stop music playback. A new circuit and heat sink design allows gradual thermal absorption and provides a gentle, almost undetectable power control.

Dual Feedback Modulation

Dual internal error correction technology – which had previously only been available in the PDX and X-Power amplifiers, is now integrated in V-Power mono amplifiers. The audio input signal is analyzed, compared, and corrected twice dynamically as the signal is processed through the amplifier. The result is amplifiers with the widest frequency response, higher damping factor, and lowest noise in its class.

Exceptionally Simple Sound Upgrade

The V-Power's 4-channel speaker level inputs connect directly to any head unit, without the need for external converters. This makes the V-Power amplifiers ideal for upgrading factory and aftermarket systems. The flush mount controls make for easy installation. The terminal covers conveniently snap-on without the need for additional tools, to protect the wiring connections while creating a clean, finished appearance.

SPECIFICATIONS

CEA-2006 Power Ratings

  • CEA-2006 Power Rating: 150W RMS x 1 (4-ohm, 14.4V at <1% THD+N)

RMS Power Ratings

  • Per channel into 4 Ohms: 150W RMS x 1 (14.4V at <1% THD+N)
  • Per channel into 2 Ohms: 250W RMS x 1 (14.4V at <1% THD+N)

Sound Tuning

  • Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct.
  • EQ (Equalizer): 0 to +12dB, fc=50Hz

Dimensions

  • Foot Print (WxHxD) mm: 190 x 55 x 200 mm
  • Foot Print (WxHxD) in: 7-1/2'' x 2-3/16'' x 7-7/8''
  • Heat Sink (WxHxD) mm: 155 x 55 x 200 mm
  • Heat Sink (WxHxD) in: 6-1/8'' x 2-3/16'' x 7-7/8''

General

  • Power Requirements: 14.4 V.DC (11-16V allowable)
  • Input Sensitivity (RCA Input): 0.15 - 4.0 V
  • Input Sensitivity (Speaker Level Input): 0.4 - 10 V
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz
  • THD+N (10W into 4 Ohms): Ɔ.02 %
  • THD+N (10W into 2 Ohms): Ɔ.03 %
  • THD+N (Rated Power into 4 Ohms): Ɔ.2 %
  • THD+N (Rated Power into 2 Ohms): Ɔ.3 %
  • Damping Factor (10W into 4 Ohms at 100Hz): >500
  • Signal to Noise (1W into 4 Ohms): >85 dB
  • Signal to Noise (Rated Power into 4 Ohms): >105 dB
  • Remote Level: -20 to 0 dB
  • Weight: 1.5 kg

FEATURES

Install

  • Terminal Layout: Two-Sided
  • Screw Mount / Wire Cover: Mounting Screw Terminals

General

  • Amplifier Type: Class-D (Digital)
  • Channel Design: 1 Channel (Mono)
  • Power Supply Design: DC-DC PWM Power Supply
  • Power Supply: MOSFET
  • Pre-Amp Stage: Discrete
  • Final Outputs: Power MOSFET
  • Crossover: Variable Lowpass Filter
  • Gain Control: Continuously Adjustable Gain Control
  • Bass EQ: Bass EQ Function
  • Bass Control: Remote Bass Control (RUX-KNOB) Ready
  • Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
  • Low-impedance Possibility:
  • Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
  • Board Circuitry: S.T.A.R. Circuit
  • Speaker-Level Inputs: 4-channel Speaker Level Inputs
  • Power Indicator: LED Power Indicator
  • Thermal Control: Multi-stage Power Limits
250W RMS x 1 (2Ω, 14.4V, ≤1% THD+N) 150W RMS x 1 (4Ω, 14.4V, ≤1% THD+N)
R2,499.99
MRV-F300
Alpine MRV-F300 4ch amp (MRV-F300)

Raising the Bar

The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.

Big Power, Small Package

V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space.

Keep the Music Playing

The V-Power amplifiers provide reliable, stable thermal performance. They use a new, higher efficiency design to achieve non-stop music playback. A new circuit and heat sink design allows gradual thermal absorption and provides a gentle, almost undetectable power control.

Exceptionally Simple Sound Upgrade

The V-Power's 4-channel speaker level inputs connect directly to any head unit, without the need for external converters. This makes the V-Power amplifiers ideal for upgrading factory and aftermarket systems. The flush mount controls make for easy installation. The terminal covers conveniently snap-on without the need for additional tools, to protect the wiring connections while creating a clean, finished appearance.

Proven Power

Each V-Power amplifier comes with its very own birth-sheet. V-Power amplifiers are tested and documented to show their true actual output.

  • 75W RMS x 4 (2Ω, 14.4V, ≤1% THD+N)
  • 50W RMS x 4 (4Ω, 14.4V, ≤1% THD+N)
  • Same power in a 40% smaller chassis
  • Evolution to Class D digital platform
  • New snap-on terminal covers for easy installation
75W RMS x 4 (2Ω, 14.4V, ≤1% THD+N) 50W RMS x 4 (4Ω, 14.4V, ≤1% THD+N)
R3,499.99
Alpine SBG-1044BR 10" Sub + box (SBG-1044BR)

With 500W peak power handling, this ready-to-use bass reflex subwoofer box is just the thing for big bass fans. It has a pre-installed SWG-1044 subwoofer and is all wired with high quality terminals in the back. Acrylic windows on the top and side provide an inside view and the blue illumination adds a cool effect. A protective grille ensures that nothing sliding around in the trunk damages the woofer.
  • Acrylic window with blue illumination
  • 10” Type-G Subwoofer
  • Peak Power: 500W
  • RMS Power: 150W
  • Box Size: 350 x 360 x 285 /395 mm
Alpine SBG-1044BR 10" Sub in a box
R2,199.99
Alpine MRV-M500 (MRV-M500)
Alpine MRV-M500
Mono V-Power Digital Amplifier
500W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)

  • 500W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)
  • 300W RMS x 1 (4Ω, 14.4V, ≤1% THD+N)
  • Same power in a 40% smaller chassis
  • Evolution to Class D digital platform
  • New snap-on terminal covers for easy installation

Raising the Bar

The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.

Big Power, Small Package

V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space.

Keep the Music Playing

The V-Power amplifiers provide reliable, stable thermal performance. They use a new, higher efficiency design to achieve non-stop music playback. A new circuit and heat sink design allows gradual thermal absorption and provides a gentle, almost undetectable power control.

Dual Feedback Modulation

Dual internal error correction technology – which had previously only been available in the PDX and X-Power amplifiers, is now integrated in V-Power mono amplifiers. The audio input signal is analyzed, compared, and corrected twice dynamically as the signal is processed through the amplifier. The result is amplifiers with the widest frequency response, higher damping factor, and lowest noise in its class.

Exceptionally Simple Sound Upgrade

The V-Power's 4-channel speaker level inputs connect directly to any head unit, without the need for external converters. This makes the V-Power amplifiers ideal for upgrading factory and aftermarket systems. The flush mount controls make for easy installation. The terminal covers conveniently snap-on without the need for additional tools, to protect the wiring connections while creating a clean, finished appearance.

Proven Power

Each V-Power amplifier comes with its very own birth-sheet. V-Power amplifiers are tested and documented to show their true actual output.

SPECIFICATIONS

CEA-2006 Power Ratings

  • CEA-2006 Power Rating: 300W RMS x 1 (4-ohm, 14.4V at <1% THD+N)

RMS Power Ratings

  • Per channel into 4 Ohms: 300W RMS x 1 (14.4V at <1% THD+N)
  • Per channel into 2 Ohms: 500W RMS x 1 (14.4V at <1% THD+N)

Sound Tuning

  • Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct.
  • EQ (Equalizer): 0 to +12dB, fc=50Hz

Dimensions

  • Foot Print (WxHxD) mm: 200 x 55 x 200 mm
  • Foot Print (WxHxD) in: 7-7/8'' x 2-3/16'' x 7-7/8''
  • Heat Sink (WxHxD) mm: 165 x 55 x 200 mm
  • Heat Sink (WxHxD) in: 6-1/2'' x 2-3/16'' x 7-7/8''

General

  • Power Requirements: 14.4 V.DC (11-16V allowable)
  • Input Sensitivity (RCA Input): 0.15 - 4.0 V
  • Input Sensitivity (Speaker Level Input): 0.4 - 10 V
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz
  • THD+N (10W into 4 Ohms): Ɔ.02 %
  • THD+N (10W into 2 Ohms): Ɔ.03 %
  • THD+N (Rated Power into 4 Ohms): Ɔ.2 %
  • THD+N (Rated Power into 2 Ohms): Ɔ.3 %
  • Damping Factor (10W into 4 Ohms at 100Hz): >750
  • Signal to Noise (1W into 4 Ohms): >85 dB
  • Signal to Noise (Rated Power into 4 Ohms): >105 dB
  • Preamp Output: 4.0V Max.
  • Remote Level: -20 to 0 dB
  • Weight: 1.8 kg
Mono V-Power Digital Amplifier 500W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)
R3,299.99
Per Page      31 - 35 of 35