AUDISON

Sort By:  
audison apx4
Audison Prima 4" Coaxial speakers
R1,849.99
avx65
6" 2 way co-axial speakers
R3,899.99
5" Split Kit 75w RMS
R2,999.99
5" 2 way co-axial speakers 50w RMS
R1,899.99
6" Split Kit VOCE Series 125w RMS
R5,999.99
Audio Processor
R4,499.99
av12
Audison AV12 Voce 12" Subwoofer 500w RMS
R6,199.99
av 1.1
Audison Voce AV 1.1 tweeters 180w
R1,899.99
6" Split Kit Prima Series 100w RMS
R2,999.99
6" Co-axial speakers 70w RMS
R2,299.99
audison apx4
Audison APX 4 co-axial speakers 4" (APX4)
APX 4 features a concentric coaxial tweeter: with one single point of sound emission it’s possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.
The 4" cones surround featuring the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.

CompTwo way coaxial
SizeWoofer 100 mm (4")
Tweeter diaphragm 24 mm (0.9")
Power Handling40 W Continuous Power
120 W Peak Power
Impedance4 Ω
Frequency Response80 ÷ 23k Hz
Sensitivity91 dB/Spl
MagnetHigh density flux ferrite
DomeWater-repellent pressed paper

Audison Prima 4" Coaxial speakers
R1,849.99
avx65
Audison AVX6.5 Voce 6" Co-Axial Speakers (AVX6.5)
The AV X6.5 coax speakers are the evolution of the woofer from the same line, thanks to the introduction of an excellent 1” Tetolon dome tweeter.
The Orientable High Frequency Tuning technology also provides the ability to optimize dispersion in high range to achieve the best performance in the listening point, while the woofer used the aerodynamic basket, the Triple Wave surround profile in butyl rubber, the CCAW voice coil wound on double layer and exclusive Cotton-fibre pressed paper cone with Light Damping treatment. The coaxial element is perfected by a refined on-wire dedicated crossover, supplied with the product.
Comp2 way Coaxial
Size165 mm (6"½)
25 mm (1")
Power Handling100 W Continuous Power
200 W Peak Power
Impedance4 Ω
Frequency Response50 ÷ 22k Hz
Sensitivity91 dB/Spl
MagnetHigh density flux ferrite
DomeCotton Fibre pressed paper with Light Damping treatment
6" 2 way co-axial speakers
R3,899.99
Audison Prima APK130 5" Split Kit (APK130)
Audison Prima APK130 5" Split Kit

Two way system features AP 1 tweeter and AP 5 Woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.
To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.


Comp2 way System
Size130 mm (5") Woofer
26 mm (1") Tweeter
46,5 x 37,5 x 20,1 mm (1.83" x 1.47 x 0.8) Crossover
Power Handling75 W Continuous Power
225 W Peak Power
Impedance

4 Ω

Frequency Response70 - 20k Hz
Sensitivity93,5 dB/Spl
5" Split Kit 75w RMS
R2,999.99
Audison Prima APX 5 co-axial speakers (APX5)
Audison Prima APX 5 co-axial speakers

APX 5 features a concentric coaxial tweeter: with one single point of sound emission it’s possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.
The 5" cones surround featuring the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.


CompTwo way coaxial
SizeWoofer 130 mm (5")
Tweeter diaphragm 24 mm (0.9")
Power Handling50 W Continuous Power
150 W Peak Power
Impedance4 Ω
Frequency Response70 ÷ 23k Hz
Sensitivity91 dB/Spl
MagnetHigh density flux ferrite
DomeWater-repellent pressed paper
5" 2 way co-axial speakers 50w RMS
R1,899.99
Audison AVK6 VOCE 6" Splits (AVK6)
Audison AVK6 VOCE 6" Split Kit

The prestigious Eisa Award “European In-Car Speaker System 2010-2011” was bestowed to the AV K6 and AV K5 kits, which gather and comprise the most advanced technologies developed for the Audison components, at the service of music.
The whole R&D laboratory’s experience was poured into the design of these precious components, to create a synergy that can offer the highest quality sound in terms of bandwidth, dynamics of the musical message, naturalness and richness of details. The new reference for their own category.

Comp2 way System
Size165 mm (6.5") Woofer
28 mm (1"1/8) Tweeter
88,3 x 123 x 36 mm (3"1/2 x 4"13/16 x 1"7/16) Crossover
Power Handling125 W Continuous Power
250 W Peak Power
Impedance

4 Ω

Frequency Response50 - 22k Hz
Sensitivity91 dB/Spl
6" Split Kit VOCE Series 125w RMS
R5,999.99
Audison bit Ten (bit Ten)
Audison bit Ten
Audio Processor

bit Ten is a multi-function digital processor featuring analog input, capable of transforming ordinary OEM or after-market system into a high-performance system.
Provided with a 32 bit, 147 MHz clock speed DSP as well as 24 bit A/D and D/A converters, bit Ten is controlled by a software especially developed for signal treatment according to the vehicle acoustic peculiarities. Setting the parameters of each input single channel, setting the delays according to the listening position, adjusting crossovers and equalizers for each of the 5 output channels; all of these operations can be managed by the PC.During the installation phase, after converting the analog signal into digital, bit Ten automatically reconstructs a digital full-bandwidth stereo signal; de-equalizes the frequency response and, if necessary, reconstructs the central and subwoofer channels.The user can configure the output mode of each channel relative to the installed system.

Analog Inputs4 high lev. + 2 pre in
Digital InputsNot available
Analog Outputs5
Digital OutputsNot available
Equalizers for each Outputs31-band graphic equalizer (1/3 Oct.; ±12dB)
Crossover Filter TypeFull / Hi-Pass / Low Pass / Band Pass
Filter mode and slopeLinkwitz @ 12 / 24
Butterworth @ 6 / 12 / 18 / 24
DE-EQ

De-equalization function to “flatten” any equalization applied by default by OEM sources.

BIT DRIVE

Auto tuning by Audison bit Tune and communication with bit Drive portal.


images for illustration purposes only, acyual product may differ from image
subject to stock availability
please call in or visit the store to confirm pricing and availability
E&OE
Audio Processor
R4,499.99
av12
Audison AV12 Voce 12" Subwoofer (AV12)
AV 12 is the Voce subwoofer, developed with the same original features of the woofer: an aluminium basket with a great aerodynamic structure, a cotton-fibre paper pressed cone with Light Damping treatment, a Triple Wave surround in butyl rubber and extremely light Copper Clad Aluminium Wire coils.
CompSingle coil Subwoofer
Size300 mm (12")
Power Handling500 W Continuous Power
1000 W Peak Power
Impedance4 Ω
Frequency Response25 ∓ 1k Hz
Sensitivity91 dB/Spl
MagnetHigh density flux ferrite
DomeCotton-Fibre pressed paper with Light Damping treatment
Xmech23 mm (7/8")
Audison AV12 Voce 12" Subwoofer 500w RMS
R6,199.99
av 1.1
Audison AV1.1 Tweeters (AV1.1)
The AV 1.1 tweeter features a very light Tetolon membrane, CCAW voice coil wound on double layer and high density Neodymium magnet.
The advanced design and engineering dedicated to the rear damping chamber with annular geometry and the magnet area, along with the attention for the selection of the materials, resulted in a frequency response on the lower limits, a reduced harmonic distortion, along with a live, natural, rich in detail sound.
CompTweeter
Size28 mm (1" ⅛)
Power HandlingHi-pass filtered 2.0 kHz @ 12 dB Oct.
180 W Peak Power
Impedance4 Ω
Frequency Response1.2k ÷ 22k Hz
Sensitivity92 dB/Spl
MagnetNeodymium
DomeTetolon fibre
Audison Voce AV 1.1 tweeters 180w
R1,899.99
Audison APK165 6" Split Kit (APK165)
Audison APK165 6" Split Kit

Two way system features AP 1 tweeter and AP 6.5 Woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.
To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.


Comp2 way System
Size165 mm (6.5") Woofer
26 mm (1") Tweeter
46,5 x 37,5 x 20,1 mm (1.83" x 1.47 x 0.8) Crossover
Power Handling100 W Continuous Power
300 W Peak Power
Impedance

4 Ω

Frequency Response60 - 20k Hz
Sensitivity93,5 dB/Spl
6" Split Kit Prima Series 100w RMS
R2,999.99
Audison Prima APX 6.5 6" co-axial speakers (APX 6.5)
Audison Prima APX 6.5 6" co-axial speakers

APX 6.5 features a concentric coaxial tweeter: with one single point of sound emission it’s possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.
The 6.5" cones surround featuring the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.


CompTwo way coaxial
SizeWoofer 165 mm (6,5")
Tweeter diaphragm 24 mm (0.9")
Power Handling70 W Continuous Power
210 W Peak Power
Impedance4 Ω
Frequency Response60 ÷ 23k Hz
Sensitivity94 dB/Spl
MagnetHigh density flux ferrite
DomeWater-repellent pressed paper
6" Co-axial speakers 70w RMS
R2,299.99
Per Page      1 - 10 of 13