Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
4" 2 way speakers 180w
R699.99
Alpine SXE-1325s 5" 2 way co-axial speakers RMS Power 35W
R999.99
avx65
6" 2 way co-axial speakers
R3,899.99
5" Split Kit 75w RMS
R2,999.99
5" 2 way co-axial speakers 50w RMS
R1,899.99
5" 2 way split kit 65w RMS power
R1,999.99
5 channel amplifier 100W RMS x 4 + 500W RMS x 1
R11,499.99
Class D amplifier 4 channel 85w RMS x 4
R6,999.99
38mm to 51mm Silicone Hose 90 degree bend
R300.00
sxe-1350s
Alpine SXE-13cs 5" Split Kit
R999.99
Alpine SXE-1025s 4" 2 way speakers (SXE-1025s)
Alpine SXE-1025s 4" 2 way speakers
  • Peak Power 180W
  • RMS Power 25W
  • Frequency Response: 100Hz-20kHz
  • Sensitivity: 90dB/W/m
  • Neodymium Magnet
  • Mylar-Titanium Balanced Dome Tweeter
  • Ferrite Magnet
  • Long Fibre Natural Pulp Cone
  • High Polymer Foam Edge
4" 2 way speakers 180w
R699.99
Alpine SXE-1325s 5" 2 way co-axial speakers (SXE-1325s)

  • Peak Power 200W
  • RMS Power 35W
  • Frequency Response: 70Hz-20kHz
  • Sensitivity: 92dB/W/m
  • Neodymium Magnet
  • Mylar-Titanium Balanced Dome Tweeter
  • Ferrite Magnet
  • Long Fibre Natural Pulp Cone
  • High Polymer Foam Edge
Alpine SXE-1325s 5" 2 way co-axial speakers RMS Power 35W
R999.99
avx65
Audison AVX6.5 Voce 6" Co-Axial Speakers (AVX6.5)
The AV X6.5 coax speakers are the evolution of the woofer from the same line, thanks to the introduction of an excellent 1” Tetolon dome tweeter.
The Orientable High Frequency Tuning technology also provides the ability to optimize dispersion in high range to achieve the best performance in the listening point, while the woofer used the aerodynamic basket, the Triple Wave surround profile in butyl rubber, the CCAW voice coil wound on double layer and exclusive Cotton-fibre pressed paper cone with Light Damping treatment. The coaxial element is perfected by a refined on-wire dedicated crossover, supplied with the product.
Comp2 way Coaxial
Size165 mm (6"½)
25 mm (1")
Power Handling100 W Continuous Power
200 W Peak Power
Impedance4 Ω
Frequency Response50 ÷ 22k Hz
Sensitivity91 dB/Spl
MagnetHigh density flux ferrite
DomeCotton Fibre pressed paper with Light Damping treatment
6" 2 way co-axial speakers
R3,899.99
Audison Prima APK130 5" Split Kit (APK130)
Audison Prima APK130 5" Split Kit

Two way system features AP 1 tweeter and AP 5 Woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.
To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.


Comp2 way System
Size130 mm (5") Woofer
26 mm (1") Tweeter
46,5 x 37,5 x 20,1 mm (1.83" x 1.47 x 0.8) Crossover
Power Handling75 W Continuous Power
225 W Peak Power
Impedance

4 Ω

Frequency Response70 - 20k Hz
Sensitivity93,5 dB/Spl
5" Split Kit 75w RMS
R2,999.99
Audison Prima APX 5 co-axial speakers (APX5)
Audison Prima APX 5 co-axial speakers

APX 5 features a concentric coaxial tweeter: with one single point of sound emission it’s possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.
The 5" cones surround featuring the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.


CompTwo way coaxial
SizeWoofer 130 mm (5")
Tweeter diaphragm 24 mm (0.9")
Power Handling50 W Continuous Power
150 W Peak Power
Impedance4 Ω
Frequency Response70 ÷ 23k Hz
Sensitivity91 dB/Spl
MagnetHigh density flux ferrite
DomeWater-repellent pressed paper
5" 2 way co-axial speakers 50w RMS
R1,899.99
Alpine SPG-13CS 5" Splitkit (SPG-13CS)
Alpine SPG-13CS 5" component system
Built to Handle High Power The new Type-G Series of component and coaxial speakers are designed and built to handle high power levels. This speaker also delivers good sound quality, due to a soft dome tweeter, square voice coil wire with Kapton bobbin and an audio tuned capacitor.

FEATURES

Tweeter

  • Tweeter Type: 20mm Silk Soft Dome Tweeter
  • Application Type: Flush/Surface Swivel Mount
  • Magnet Material: Neodymium Magnet

Woofer

  • Cone Material: Polypropylene Cone Pearl Mica Injection
  • Voice Coil Type: Square Voice Coil Wire
  • Magnet: Ferrite Magnet
  • Frame: Injection Mold Frame
  • Design: Long Excursion Design

Crossover Network

  • Design: Separated Network Design Possibility
  • Attenuation Control: 3-Level
  • Mounting: Easy-Mount Screw Terminals

SPECIFICATIONS

Power Handling

  • Peak Power: 250 W
  • RMS Power: 65 W

Dimensions

  • Woofer Mounting Diameter: 11.0 cm
  • Woofer Mounting Depth: 4.3 cm

General

  • Frequency Response: 65 Hz to 20 kHz
  • Impedance: 4 Ω
  • Sensitivity: 87dB / W (1m)
5" 2 way split kit 65w RMS power
R1,999.99
Alpine PDX-V9 5ch Amp (PDX-V9)
OUT OF STOCK

Alpine PDX-V9 5ch Amp
The new Alpine PDX Series amplifiers are completely re-engineered for performance, sound quality, and reliability. The PDX series are for the true car audio

The Alpine PDX Series is a recipient of the 2010 CES Innovations honors award. Every year at the world’s largest consumer technology tradeshow, the Consumer Electronics Show (CES), the Innovations Designs and Engineering Awards program recognizes the most innovative consumer electronics products, such as the PDX Series for the In-Vehicle Audio category.

This super-wide, industry leading frequency range offers listeners unparallel sound quality and detail that bests even the most high-end audiophile equipment. 5Hz-100kHz for 4ch, 5Hz-400Hz for Mono (+0,-3dB), and 3Hz~100kHz (+0dB, -3dB), Mono: 3Hz~600Hz (+0dB, -3dB) for 5ch.

These amps are capable of unheard of S/N ratios up to 95dB S/N @ 1W, 122dB S/N at rated power for extremely clean, uncolored sound. Forget unwanted background noise or static. The PDX amps deliver crystal clear music every time.

Each PDX amplifier comes with its very own birth-sheet. PDX amplifiers are tested and documented to show their true actual output.

If the amp gets too hot, the Thermal Protection circuit kicks in and gradually decreases output power until it cools down. Once cool, the power output automatically increases back to the previous level. If the circuit detects a Low Battery condition, it will gradually decrease power output if battery voltage becomes too low. Once the battery voltage increases, power will be restored. This interruption-free design allows for non-stop enjoyment with no hiccups or drop-outs, just clean, clear output.

CEA-2006 Power Ratings
  • CEA-2006 Power Rating: 100W RMS x 4 + 500W RMS x 1 (4-ohm/2-ohm, 14.4V at <1% THD+N)
Max Power Output Ratings
  • Max Power: 1600W
RMS Power Ratings
  • Per channel into 4 Ohms: 100W RMS x 4 + 500W RMS (4-ohm, 14.4V <1%THD+N)
  • Per channel into 2 Ohms: 100W RMS x 4 + 500W RMS (2-ohm, 14.4V <1%THD+N)
  • Bridged 4 Ohms: 200W RMS x 2 (4-ohm, 14.4V <1%THD+N)
Sound Tuning
  • Crossover Frequency (CH1/2, HPF): 30 - 600 Hz (x1), 300 - 6k Hz (x10), -12 dB/oct.
  • Crossover Frequency (CH3/4, HPF): 30 - 600 Hz (x1), -12 dB/oct.
  • Crossover Frequency (CH3/4, BPF): 30 - 600 Hz (HPF), 300 - 6k Hz (LPF), -12 dB/oct.
  • Crossover Frequency (Subwoofer): 50 - 600 Hz, -24 dB/oct.
  • Subsonic Filter: 3 - 30 Hz, -24 dB/oct.
Dimensions
  • Foot Print (WxHxD) mm: 257 x 50.8 x 192 mm
  • Foot Print (WxHxD) in: 10-1/8'' x 2'' x 7-1/2''
General
  • Power Requirements: 14.4 V.DC (11-16 V allowable)
  • Input Sensitivity (RCA Input): 0.2 - 4 V (CH1/2, CH3/4), 0.1 - 4 V (Subwoofer)
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for CH-1/2/3/4: 3 - 100k Hz
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 3 - 600 Hz
  • THD+N (10W into 4 Ohms) for CH-1/2/3/4: <0.005 %
  • THD+N (10W into 4 Ohms) for Subwoofer: <0.006 %
  • THD+N (Rated Power into 4 Ohms) for CH-1/2/3/4: <0.03 %
  • THD+N (Rated Power into 4 Ohms) for Subwoofer: <0.05 %
  • Damping Factor for CH-1/2/3/4: >500 into 4 ohms at 100Hz
  • Damping Factor for Subwoofer: >1000 into 4 ohms at 100Hz
  • Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 112 dB
  • Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 119 dB
  • Weight: 2.7 kg
FEATURES

Install
  • Connectors: Quick Connect Terminals for Power Supply and Speaker Output
  • Terminal Layout: One-Sided
  • Mounting Design: Easy Stacking and Smart Installation
General
  • Amplifier Type: Class-D (Digital)
  • Channel Design: 4-channel + 1-channel (Mono)
  • Power Supply Design: DC-DC PWM Power Supply
  • Pre-Amp Stage: Discreat
  • Final Outputs: MOSFET
  • Crossover: Variable High Pass, Low Pass and Band Pass Filter
  • Gain Control: Continuously Adjustable Gain Control
  • Subsonic Filter: Variable Subsonic Filter
  • Bass Control: Remote Bass Control (RUX-KNOB) Ready
  • Low-battery Protection: Low-battery Protection
  • Low-impedance Possibility: Low-impedance Possibility
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Board Circuitry: S.T.A.R. Circuit
  • Board Design: 6-layer Glass Epoxy PC Board
  • Power Indicator: Top Mounted LED Power/Status Indicator
  • Input Channel Mode Setting (CH1/2 & CH3/4): Input Channel Mode Setting (CH1/2 & CH3/4)
  • Input Channel Mode Setting (Subwoofer): Input Channel Mode Setting (Subwoofer)
  • Thermal Control: Thermal Management Control
5 channel amplifier 100W RMS x 4 + 500W RMS x 1
R11,499.99
Alpine PDR-F50 4ch amp (PDR-F50)
Alpine PDR-F50
There Is No Substitute for the Sound of PDR

Welcome the new digital PDR-Power series of Class-D amplifiers. The PDR-Power amplifiers incorporate many of Alpine’s best in class digital technologies, high performance and signature sound.

The PDR-Power amplifiers offer the best performance in their class, redefining expectations in the high-power amplifier category. Thanks to trickle-down technology, our in-house engineering team has taken many of the patent-pending technologies introduced in the industry-leading PDX series and infused them in the new PDR-Power amplifiers. The PDR-Power amps provide you with the absolute widest bandwidth, best signal-to-noise, lowest distortion and highest damping factor of any amplifier in their class without sacrificing power.

Dual-Feedback Modulation Loop

When playing music, a clean, distortion-free, low-power signal input to an amplifier should exit as an identical high-power output signal to drive your speakers. In reality, most amps don’t even come close to this ideal, instead adding significant audible distortion especially in the high frequencies, earning typical Class-D amplifiers a deserved reputation for bad sound. The PDR-Power’s Global Modulation with Adaptive Feedback Control loop circuitry intelligently assures the power output is as clean and distortion-free as possible. Their real-time error-correction analyzes the signal not only once, but twice by comparing input signal with the output throughout the entire amplification process. In doing so, PDR-Power amplifiers ensure that their output signal delivers a clean, clear and powerful sound that must be heard to be believed.

Small, Powerful Design

The new PDR-Power series amplifiers have decreased in size compared to the X-Power, yet they pack in much more flexibility, durability with Alpine sound quality.

Standing Alone in the Clarity Class

Ultra-Wide Frequency Bandwidth: This super-wide, industry leading frequency range offers listeners unparallel sound quality and detail that bests even the most high-end audiophile equipment.

Best Signal-to-Noise: In order to ensure that all of the industry-leading sound quality is heard at your ears, we’ve worked to create a platform that offers an unbelievably low noise floor, taking extra care to ensure a clean signal path, with no extraneous inferences.

Low Distortion: PDR-Power amps offer extremely wide and linear frequency response that results in unparalleled musical detail. Extremely low distortion means pure musical performance without audible artifacts to destroy your sound experience. Additionally, these amps have extremely high stereo separation and smooth phase response, which means more dynamic realistic imaging and staging for your total musical enjoyment. On the Mono side, best-in-class low distortion and tight control will give you clean, accurate bass response.

Unequaled Reliability

Excessive heat is the enemy of amplifiers and under extreme conditions will result in most amps shutting down completely. PDR-Power amps use a special Multi-Stage Power Management circuit that continuously monitors critical component temperatures throughout the amplifier and decreases power output if anything gets too hot. If you are playing music under heavy loads for long periods, the circuit automatically reduces power output slightly at first, and then further in a second stage if necessary. This two-stage approach provides seamless, interruption free listening experience for non-stop music playback.

Rotatable Illuminated Alpine Badge

PDR-Power amplifiers come with a rotatable illuminated badge that makes a very attractive presentation when mounted vertical or horizontally.

Topside Controls and Adjustments

Topside controls on top of the PDR-Power amplifiers make installation and tuning easier than its predecessors. Just unscrew two fasteners and you’ll have access to all the controls needed to tune the amplifier. Their small size and versatile controls allow the PDR-Power amplifiers to easily be added to either an aftermarket or factory system and can be setup to accommodate a variety of system configurations.

Proven Power—Certified From Birth

All PDR-Power amplifiers are individually tested and have certified power ratings. Each amp comes with their very own verification certificate documenting its actual power output exceeds the rating by a wide margin.

  • Class-D Performance
  • PDX Technology Inside
  • Rotatable Illuminated Alpine Badge
  • Top-Side Control Panel
  • Voltage ON/OFF Sensing for OEM Upgrade
  • Built-in Crossover & Bass EQ
  • Remote Bass (RUX-KNOB) Compatible
  • Sound Quality

CEA-2006 Power: Rating 85W x 4 (4Ohm@14.4 V =0.09% THD+N), 125W x 4 (2 0hm@14.4V=0.07%) S/N 106dB (Ref: 1W into 4Ohm)

E&OE
Class D amplifier 4 channel 85w RMS x 4
R6,999.99
38mm to 51mm Silicone Hose 90 degree bend (38-51mm 90bend)
38mm to 51mm Silicone Hose
90 degree bend
4 ply silicone

*image for illustration purpose only*
*Actual product may differ from image*
E&OE
38mm to 51mm Silicone Hose 90 degree bend
R300.00
sxe-1350s
Alpine SXE-13cs 5" Split Kit (SXE-13cs)
  • Peak Power 250W
  • Frequency Response: 60Hz-20kHz
  • Sensitivity: 90dB/W/m
  • Neodymium Magnet
  • Mylar-Titanium Balanced Dome Tweeter
  • Ferrite Magnet
  • Long Fibre Natural Pulp Cone
  • High Polymer Foam Edge
Alpine SXE-13cs 5" Split Kit
R999.99
Per Page      1 - 10 of 77