Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
4.1 Channel Digital Sound Processor (DSP) with Powered Subwoofer
R9,999.99
R11,999.99
8" Active Subwoofer 120w RMS
R4,499.99
8" Active Subwoofer 3000w
R1,549.99
Alpine PWD-X5 active subwoofer (PWD-X5)
Alpine PWD-X5 active subwoofer
4.1 Channel Digital Sound Processor (DSP) with Powered Subwoofer

Achieving a perfectly integrated, high-performance car audio installation with only one device is now possible with the new Alpine PWD-X5.

This very unique sound system upgrade product includes a high-performance Digital Sound Processor (DSP), 4-channel amplifier for your front and rear door speakers, as well as an ultra-flat active subwoofer. The small footprint allows the PWD-X5 to be easily installed inside the car’s cabin to enjoy a nice bass upgrade. Connect either OEM radios via high-power speaker level inputs or aftermarket radio via RCA inputs, and control the system through the wired remote control and the convenient smartphone app.

This product is perfect for customers that look for a big improvement of their car’s sound quality, without installing many different devices and routing cables all across their car.

All-in-one sound upgrade

The PWD-X5 features a Digital Sound Processor (DSP), compact powered subwoofer and a 4-channel amplifier - all in one box. This is perfect for smaller vehicles and customers who do not want to install many different devices in their car. The built-in amplifier delivers 4 x 50 Watts for the speaker channels and 240 Watts for the built-in subwoofer (peak power).

Compact installation

The very compact measurement of only 350mm length x 245mm width x 80mm height allows the PWD-X5 to be installed under the front seats of many vehicles. It can be also easily installed in the trunk of hatchback or coupe cars. The total weight of the product is just above 5kg.

Extensive sound tuning functions

Use the built-in 10-band Parametric EQ, digital time correction and digital crossover to tune the sound of your vehicle. You can do the main setup by connecting a PC using the free Alpine software or via the included wired controller. There is also a smartphone app that allows users to switch between pre-sets on the go and adjust subwoofer and volume levels.

Wide connectivity options

You can connect the PWD-X5 to an Aftermarket radio using RCA inputs. If you have an original radio in your car that has nor RCA connections, you can connect it to the DSP amplifier using the high-power inputs. There are also 2 USB ports used for the included external Bluetooth dongle and to connect the wired remote control and PC for setup.

Wired Remote Control

The remote control unit is connected with the DSP amplifier by USB. Use the rotary encoder to select pre-sets, input sources, sound settings and more.

Bluetooth Audio Streaming

If your original car stereo does not feature Bluetooth audio streaming, the PWD-X5 is yet again a great solution for you. With the included Bluetooth dongle that can be plugged in to one of the USB ports on the DSP amp you can stream music from your smartphone to the PWD-X5. Simply pair your phone and select Bluetooth as a source in the wired remote controller to enjoy all your music, Spotify and internet radio on your sound system.

Get the Smartphone App

You can download the Alpine companion app for the PWD-X5 from Google Play and the Apple App Store free of charge. This app allows you to set the master volume and subwoofer level, select sound pre-sets, switch audio input sources, adjust the 10-band Parametric EQ, Crossover, Fader/Balance and much more.

Technical Specifications

  • Power output:
    Rated power: 25W*4+165W;
    peak power: 50W*4+240W
  • Signal-to-noise ratio: ≥80dB
  • Bass boost: -12dB~+12dB
  • Frequency response: 20Hz~20KHz
  • Input impedance: Low-level input: 20KΩ; high-level input: 100Ω
  • Phase selection: 0°/180°
  • Remote ON: DC high-level /REM input activation
  • Operating temperature: -10~60°C
  • Storage temperature: -40~85°C
  • Power source: DC 14.4V (9V~16V) negative ground
  • Activate REM input: Options of high-level activation (H1+/H3+) and ACC activation for selection
  • Activate REM output: +12V activation voltage output (0.5A)
  • Stand-by current: 750mA
  • Net weight: 5.35kg
  • Measurements: 350mm (L) *245mm (W) *80mm (H)


Functional Parameters

  • Type of input signals: 4-channel high-level, 4-channel stereophonic low-level, Bluetooth
  • Output position: 4-channel amplifier output (4Ω 25W*4)
  • Output signal gain:
    Master volume: 0~35;
    Subwoofer volume: 0~15
  • Filter slope:
    CH1~CH4 6 dB/Oct or 12dB/Oct
    CH5 6/12/18/24dB/Oct
  • Q value: 0.404~28.85
  • Delay: 0.000~5.4ms/0.000~187cm
  • PreSets: 15 presets selectable


image for illustration purposes only, actual product may differ from image
please call in to confirm pricing and stock availability.
E&OE




4.1 Channel Digital Sound Processor (DSP) with Powered Subwoofer
R9,999.99
R11,999.99
Alpine PWE-S8 Active Subwoofer (PWE-S8)
Alpine PWE-S8 Active Subwoofer

Powered 8-inch (20cm) Quad-Coil Subwoofer Box with auto-sensing Speaker inputs and built-in 240W Amplifier - PWE-S8

The compact PWE-S8 amplified subwoofer system lets you add deep, accurate bass to your sound system without taking up much space in your vehicle.

With the PWE-S8, the high-excursion 8-inch subwoofer and 120W (RMS) gives strong bass output.

With a shallow mount, the PWE-S8 is just 3-inches deep (at deepest point), 13.5-inches wide and 9-inches tall - completely application ready. This compact subwoofer system works well under or behind the seat of a pickup truck, in a sedan trunk, or in the hatch of an SUV.

The side panel offers easy access to RCA and auto-sensing speaker inputs. The side panel also gives access to Phase, Gain, LP Crossover and Remote Sub Level controls for greater flexibility during installation.

  • 8-inch (20cm) Sealed Active Subwoofer
  • Built-in 240W Amplifier (120W RMS)
  • Frequency Response: 25 – 152Hz
  • Volume Remote Controller (0 to-20dB / 4m cable)
  • Phase Selector (0° / 180°)
  • Adjustable cut-off Frequency (50 – 150Hz)
  • RCA (0.1-4V) / Speaker Input (1.5-30V/auto sensing)
  • Easy Under Seat Installation
  • Full die-cast Housing (4.6Kgs)
  • Dimensions: 340mm x 230mm x 70mm


E&OE
please call to confirm pricing and availability
8" Active Subwoofer 120w RMS
R4,499.99
Powerwbass PB1500BK Active Subwoofer (PB1500BK)
Powerwbass PB1500BK Active Subwoofer

P.W.M Mosfet Power Supply
RCA Input / High Level Input
Remote Control for Subwoofer Level
Phase Switch (0-180 degrees)
Bass Boost 0-12dB @ 45Hz
Subsonic Filter (20-50Hz)
LPF Filter (50-150Hz)
Power 1500w @ 4 Ohms
Auto Powr On/Off
Soft Delayed Remote turn-on
Protection circuit: Thermal Protection Circuit
Short Protection Circuit
Overload Protection Circuit
Illumination: Blue LED
Slim Woofer: 8", 4 Ohms
Dimensions: 325 x 250 x 68mm (L x W x H)


E&OE
please call in to confirm pricing and availability
8" Active Subwoofer 3000w
R1,549.99
Per Page      1 - 3 of 3