Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
4.1 Channel Digital Sound Processor (DSP) with Powered Subwoofer
R9,999.99
R11,999.99
8-Channel Digital DSP Amplifier
R15,999.99
mono block amp
R999.99
Monoblock amplifier 6000w
R1,199.99
4ch amplifier 6400w
R1,499.99
14000W Digital Monoblock
R3,499.99
5 channel 5 Ch 105 W x 4 + 330 W x 1 (2Ω)
R7,499.99
20000W Digital Monoblock
R4,999.99
4 Channel Amp 95w RMS per channel
R3,499.99
Alpine PWD-X5 active subwoofer (PWD-X5)
Alpine PWD-X5 active subwoofer
4.1 Channel Digital Sound Processor (DSP) with Powered Subwoofer

Achieving a perfectly integrated, high-performance car audio installation with only one device is now possible with the new Alpine PWD-X5.

This very unique sound system upgrade product includes a high-performance Digital Sound Processor (DSP), 4-channel amplifier for your front and rear door speakers, as well as an ultra-flat active subwoofer. The small footprint allows the PWD-X5 to be easily installed inside the car’s cabin to enjoy a nice bass upgrade. Connect either OEM radios via high-power speaker level inputs or aftermarket radio via RCA inputs, and control the system through the wired remote control and the convenient smartphone app.

This product is perfect for customers that look for a big improvement of their car’s sound quality, without installing many different devices and routing cables all across their car.

All-in-one sound upgrade

The PWD-X5 features a Digital Sound Processor (DSP), compact powered subwoofer and a 4-channel amplifier - all in one box. This is perfect for smaller vehicles and customers who do not want to install many different devices in their car. The built-in amplifier delivers 4 x 50 Watts for the speaker channels and 240 Watts for the built-in subwoofer (peak power).

Compact installation

The very compact measurement of only 350mm length x 245mm width x 80mm height allows the PWD-X5 to be installed under the front seats of many vehicles. It can be also easily installed in the trunk of hatchback or coupe cars. The total weight of the product is just above 5kg.

Extensive sound tuning functions

Use the built-in 10-band Parametric EQ, digital time correction and digital crossover to tune the sound of your vehicle. You can do the main setup by connecting a PC using the free Alpine software or via the included wired controller. There is also a smartphone app that allows users to switch between pre-sets on the go and adjust subwoofer and volume levels.

Wide connectivity options

You can connect the PWD-X5 to an Aftermarket radio using RCA inputs. If you have an original radio in your car that has nor RCA connections, you can connect it to the DSP amplifier using the high-power inputs. There are also 2 USB ports used for the included external Bluetooth dongle and to connect the wired remote control and PC for setup.

Wired Remote Control

The remote control unit is connected with the DSP amplifier by USB. Use the rotary encoder to select pre-sets, input sources, sound settings and more.

Bluetooth Audio Streaming

If your original car stereo does not feature Bluetooth audio streaming, the PWD-X5 is yet again a great solution for you. With the included Bluetooth dongle that can be plugged in to one of the USB ports on the DSP amp you can stream music from your smartphone to the PWD-X5. Simply pair your phone and select Bluetooth as a source in the wired remote controller to enjoy all your music, Spotify and internet radio on your sound system.

Get the Smartphone App

You can download the Alpine companion app for the PWD-X5 from Google Play and the Apple App Store free of charge. This app allows you to set the master volume and subwoofer level, select sound pre-sets, switch audio input sources, adjust the 10-band Parametric EQ, Crossover, Fader/Balance and much more.

Technical Specifications

  • Power output:
    Rated power: 25W*4+165W;
    peak power: 50W*4+240W
  • Signal-to-noise ratio: ≥80dB
  • Bass boost: -12dB~+12dB
  • Frequency response: 20Hz~20KHz
  • Input impedance: Low-level input: 20KΩ; high-level input: 100Ω
  • Phase selection: 0°/180°
  • Remote ON: DC high-level /REM input activation
  • Operating temperature: -10~60°C
  • Storage temperature: -40~85°C
  • Power source: DC 14.4V (9V~16V) negative ground
  • Activate REM input: Options of high-level activation (H1+/H3+) and ACC activation for selection
  • Activate REM output: +12V activation voltage output (0.5A)
  • Stand-by current: 750mA
  • Net weight: 5.35kg
  • Measurements: 350mm (L) *245mm (W) *80mm (H)


Functional Parameters

  • Type of input signals: 4-channel high-level, 4-channel stereophonic low-level, Bluetooth
  • Output position: 4-channel amplifier output (4Ω 25W*4)
  • Output signal gain:
    Master volume: 0~35;
    Subwoofer volume: 0~15
  • Filter slope:
    CH1~CH4 6 dB/Oct or 12dB/Oct
    CH5 6/12/18/24dB/Oct
  • Q value: 0.404~28.85
  • Delay: 0.000~5.4ms/0.000~187cm
  • PreSets: 15 presets selectable


image for illustration purposes only, actual product may differ from image
please call in to confirm pricing and stock availability.
E&OE




4.1 Channel Digital Sound Processor (DSP) with Powered Subwoofer
R9,999.99
R11,999.99
Alpine PDP-E800DSP (PDP-E800DSP)
Alpine PDP-E800DSP
8-Channel Digital DSP Amplifier

Alpine introduces the all-new PDP-E800DSP Digital DSP amplifier. This amazing all-in-one solution allows sound upgrading for virtually any vehicle with its incredible versatility and connectivity options.

Featuring 6 input channels (both pre-amp and speaker level), as well as up to 8 fully configurable output channels allow for a very wide range of system applications and flexibility. Tune your sound with a professional 240-band Parametric EQ, 8 channel digital time correction, as well as a 8 channel digital crossover.

For system setup, use the Alpine PC software to connect wirelessly or via USB to the PDP-E800DSP. The very intuitive and easy-to-use software allows for full control over all settings and displays all data in a very nice graphical user interface.

The free-of-charge Alpine Remote Control for PDP-E800DSP app (available for both Android and iPhone) lets you control your DSP amp on the go and includes the most important functions, such as master-volume, subwoofer level, source selection, pre-set recall and more.

The PDP-E800DSP is the perfect solution especially for OEM upgrades, where the factory radio can’t be replaced by an after-market solution to get better sound. The Alpine DSP amp simply adds-on to the existing OEM system, allowing you to build any sound system around your factory system.

Build your speaker system

You can freely configure the 8 output channels to your needs. Each channel delivers 100 Watts @ 4 Ohms (but limited to 700 Watts total output) and can be configured to be used as a tweeter, midrange, centre or woofer channel. You can also use two channels in parallel for a powerful 200 Watts subwoofer channel. The PDP-E800DSP includes digital crossovers, so you do not need to worry about installing passive crossovers all over the car. With a 20Hz to 22kHz frequency response range for all channels, you can build virtually any system you can think of.

Highest connection versatility and flexibility

The PDP-E800DSP is extremely versatile and flexible – it can be added-on to virtually any factory or aftermarket car entertainment system to build the sound system you require. Connect the DSP amp to your factory system through the 6-channel speaker-level inputs with remote sensing, or alternatively, use the 6-channel pre-amp inputs (RCA). There is also an Optical input (max 24bit / 96kHz) to connect additional sources

Pure Class-D technology

The Alpine DSP amp uses Class-D amplification technology: this means once an analogue input signal is converted to digital, it remains fully digital throughout the entire processing and amplification stage. With Class-D technology, an amplifier can reach much higher efficiency - meaning less heat production and therefore a much smaller heat-sink. This results in a very small, compact housing, that can be easily placed somewhere in the vehicle (205mm x 150mm x 50mm).

Wireless audio playback

If you use an Android phone, you can use the micro USB connection on the Alpine PDP-E800DSP to transfer and enjoy lossless audio files in full bandwidth. You can also connect your phone to the DSP amp using WiFi (wireless module is included with the PDP-E800DSP). We recommend to use the USB Audio Player Pro app for Android.

240-band Parametric EQ and X-Over

The Parametric EQ is very easy to use: 30 bands per channel can be simply adjusted with sliders in real-time. The display gives you visual feedback of your adjustments. You can also set the digital X-Over for all 8 channels separately (HP, LP, BP 6/12/18/24dB/30dB, type of filter Butterworth, Bessel, Chebyshev selectable). There is also a Phase Inversion (0,180) possible.

GENERAL

  • 6 high-level inputs for OEM system integration
  • 6 analog Pre-Amp inputs (RCA) for aftermarket head unit connectivity
  • 1 digital TOSLINK/SPDIF input
  • Up to 8 speaker outputs with high power rating
  • 110dB signal-to-noise ratio (digital input)
  • Channel separation > 75dB
  • USB Device input for DSP setup by PC
  • Wireless connection with separate module (amp setup) for PC only, or wireless audio streaming (smart phone or PC))
  • Class-D amplifier with fully digital audio path
  • ADCs by Burr Brown
  • Remote app for iOS and Android with basic control functions (Master level, Sub level, Preset recall, source selection)
  • Pre-amp output (copy from channel 8, for external sub woofer amp)

AMP

  • BurrBrown A/D conversion
  • Full digital audio path
  • High output power capability
  • Total power 700 Watt RMS at 4 Ω
  • 100 Watt per channel at 4 Ω
  • 120 Watt per channel at 2 Ω
  • 200 Watt at 2 Ω (2 channels in parallel mode)
  • Advanced diagnostics for each output channels (shortcut, overheat, clipping)
  • Start-Stop Engine compatible
  • Load Capability: 4 – 2 Ω
  • Parallelized output supported

DSP

  • Latest Analog Device chip (ADAU1452)
  • Up to 8 speaker outputs with independent adjustable output level
  • Independent or linkable setups for all output channels
  • Delay on each channel up to 14,57ms, 0.01msec steps
  • 30-band Graphic Equalizer per channel with configurable frequency, Q (from 1 up to 15) and Gain (-10dB /+10 dB)
  • Digital X-Over for each channel (HP, LP, BP) 6/12/18/24dB/30dB, type of filter (Butterworth, Bessel, Chebyshev) selectable
  • Phase Inversion (0,180)
  • Master Volume (0 – 42dB)
  • Sub control (0 - 15 dB)
  • Possibility to save/load up to 6 presets on DSP
  • Settings can be secured by certificates
  • Free adjustable analog routing (example: channel mixing for center channel or 3-way input signal)
  • EQ ON/OFF possible (for each channel)
  • Delay grouping for easier TCR adjustment (up to 4 groups possible)
  • TCR ON/OFF for each channel possible
  • TCR help calculation for beginners
  • Overview page for all settings
  • Live monitor (for battery voltage and amp temperature)
  • Turn ON by signal or wire
  • Alpine RUX-KNOB2 ready (master volume or sub level)
  • Additional gain on analog input (+6; +9db ). For sources with lower pre-amp level than 2 Volts

images for illustration purposes only, actual product may differ from image
please call in or visit the store to confirm pricing and availability
E&OE
8-Channel Digital DSP Amplifier
R15,999.99
Predator PR3800.1D (PR3800.1D)
Predator PR3800.1D

1 channel MONO Block amplifier
3800w
Class D amp
1 OHM Stable
Overload protection



E&OE
image for illustration purposes only, actual product may differ from image
please call in or come into the store to verify stock availability & pricing
mono block amp
R999.99
Star Audio M400 (M400)
Staraudio M400
6000w Monoblock Amplifier

MONO BLOCK
MOSFET POWER AMPLIFIER
1 CHANNEL
2 OHM STABLE
ADJUSTABLE HIGH PASS AND LOW PASS FILTER
VARIABLE BASS BOOSTER
TRI-MODE OUTPUT CONFIGURATION


images for illustration purposes only, actual product may differ from image
please call in or visit the store to confirm pricing and availability
E&OE
Monoblock amplifier 6000w
R1,199.99
Targa TA-T6400.4 (TA-T6400.4)
Targa TA-T6400.4
4 channel 6400w amplifier

Low pass filter (variable) - 50Hz-250Hz
High pass filter (variable) - 120Hz-3KHz
Frequency response (-1 dB) - 10Hz - 250Hz
Signal to noise ratio - >90 dB
Input sensitivity - 200mV-6V
Input impedance - 2k Ohm
Speaker impedance - 4 Ohm
Fuse rating - 25A x2
Dimensions (mm) - 320x240x55


images for illustration purposes only, actual product may differ from image
please call in or visit the store to confirm pricing and availability
E&OE
4ch amplifier 6400w
R1,499.99
Powerbass PB1.4400D 14000w monoblock (1.4400D)
Powebass PB1.4400D

14000W Digital Monoblock
Frequency Response: 10Hz - 250Hz
Input Sensitivity: 0.2-0.6V
Signal to Noise Ratio: >95dB
THD%: <0.1%
Variable High-Pass: N/A
Variable Low-Pass: 35Hz - 250Hz
Variable Subsonic Filter: 15Hz - 35Hz
45Hz Bass boost: 0-18dB
Input (RCA Jack)
Bass Boost Remote Control


*image for illustration purpose only*
please call in or visit the store to confirm pricing & availability
E&OE
14000W Digital Monoblock
R3,499.99
Hertz HCP 5D 5ch amplifier (HCP5D)
Hertz HCP5D 5 channel amplifier

Class D 5 Channel Amplifier

HCP 5D is a front + rear + sub complete car audio amplifier with five very powerful  D class channels. It features a wide range of inputs to obtain the best configuration with every car audio source. HCP 5 D is suitable in a five channels system with subwoofer, in a tree channel front + sub system using the front and rear built-in filters that include also a bass boost circuit and a subsonic filter.

All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier.

Channel mode5 - 3
Output Power (RMS)
@ 14.4 VDC
5 Ch 65 W x 4 + 200 W x 1 (4Ω)
5 Ch 105 W x 4 + 330 W x 1 (2Ω)
3 Ch 210 W x 2 (4Ω) + 200 W x 1 (4Ω)
3 Ch 210 W x 2 (4 Ω) + 330 W x 1 (2 Ω)
Filters
Bypass
Hi-Pass
Lo-Pass
Band-Pass
Subsonic

Yes
A Ch: 50 ÷ 5 kHz @ 12 dB/Oct. B Ch: 50 ÷ 500 Hz @ 12 dB/Oct.
C Ch: 50 ÷ 500 Hz @ 24 dB/Oct.
A Ch: 50 ÷ 500 Hz(Hi) @ 12 dB/Oct. B Ch: 50 ÷ 5 kHz(Lo) @ 12 dB/Oct.
25 Hz @ 24 dB/Oct.
Distortion - THD
(100Hz @ 4Ω)
0.02%
S/N Ratio
(A weighted @ 1V)
100
Damping factor
(100Hz @ 4Ω)
A & B Ch 100
C Ch 250
Size W x D x H
mm (in.)
345 x 190 x 50 (13.58 x 7.48 x 1.97)
5 channel 5 Ch 105 W x 4 + 330 W x 1 (2Ω)
R7,499.99
Powerbass PB1.8800D 20 000w monoblock (1.8800D)
Powerbass PB1.8800D
20000W Monoblock amplifier
Frequency Response: 10Hz - 250Hz
Input Sensitivity: 0.2-0.6V
Signal to Noise Ratio : 95dB
THD%: 0.1%
Variable Hi-pass: N/A
Variable Low-Pass: 35Hz - 250Hz
Variable Subsonic Filter: 15Hz - 35Hz
45Hz Bass Boost: 0-18dB


*image for illustration purpose only*
E&OE
20000W Digital Monoblock
R4,999.99
Audison SR1DK monoblock amplifier (SR1DK)
SR 1Dk is a powerful mono Digital amplifier representing maximum expandability in terms of power and configuration capability.
Featuring a PRE OUT recreated from the hi-level speakers inputs and by-passable full configurable crossover along with its ability to operate in "cascade" mode linking many amplifiers together, its extreme versatility makes it a premium product.
Load Imp.Mono
4 Ω600 W x 1
4/2 Ω1800 W x 1
2 Ω940 W x 1
1 Ω1200 W x 1
1200W monoblock
R8,999.99
HERTZ HCP 4 (HCP4)
HERTZ HCP 4

HCP 4 is a four channels car audio amplifier designed to reproduce any musical genres with four separate channels for multiple configurations. Pre-amplified (Pre-In) inputs and high-level (Speaker-In) inputs allow for connection with any head units. Built to work both in mono, as part of a three-channel system with sub and front, and in stereo for a powerful two-channel system, HCP 4 is a unique model in terms of versatility!

All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier.

Channel mode4 - 3 - 2
Output Power (RMS)
@ 14.4 VDC
4 Ch: 65 W x 4 (4 Ω)
4 Ch: 95 W x 4 (2 Ω)
3 Ch: 65 W x 2 (4 Ω) + 190 W x 1 (4 Ω)
3 Ch: 95 W x 2 (2 Ω) + 190 W x 1 (4 Ω)
2 Ch: 190 W x 2 (4 Ω)
Filters
Bypass
Hi-Pass
Lo-Pass

Yes
A/B: 80 Hz @ 12 dB/Oct.
A/B: 50 ÷ 500 Hz @ 12 dB/Oct.

Distortion - THD
(100Hz @ 4Ω)
0.01%
S/N Ratio
(A weighted @ 1V)
103 dB
Damping factor
(100Hz @ 4Ω)
120
Size W x D x H
mm (in.)
315 x 190 x 50 (12.40 x 7.48 x 1.97)

REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY

The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.

COMPLETED FILTER SECTION

Large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.

HCP ELECTRONICS

Special balanced input circuitry rejects electro-magnetic disturbances present on the Pre-amplified or Speaker level inputs. Power supply stage features a multiple winding transformer and Low-ESR 105°C capacitors, selected to ensure high efficiency and current capability.

E&OE
please call in to confirm availability & Pricing
4 Channel Amp 95w RMS per channel
R3,499.99
Per Page      1 - 10 of 10