Speakers

All the different speakers to enhance your audio experience in car or boat or caravan or where ever you choose to install.

Sort By:  
4" Speakers
R0.00
3 way 6x9 speakers
R0.00
6" Split Kit
R0.00
6" Co-Axial Speakers
R0.00
2-Way 4" Speakers
R0.00
4way 6x9 speakers
R0.00
6" Split System
R0.00
6" Co-Axial Speakers
R0.00
5" Split Kit
R0.00
6" Co-Axial Speakers -70w RMS
R0.00
5" Co-Axial Speakers
R0.00
6" 2 way speakers
R0.00
6" Split Kit
R0.00
6" Co-axial speakers
R0.00
6x9 speakers
R0.00
6" Component System
R0.00
5" Co-axial Speakers
R0.00
4" Speakers
R399.99
AUDISON APX4 (APX4)

PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY.

AUDISON APX4


APX 4

APX 4 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.
The 4″ cones surround features the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.

Comp

Two way coaxial

Size

Woofer 100 mm (4″)
Tweeter diaphragm 24 mm (0.9″)

Power Handling

40 W Continuous Power
120 W Peak Power

Impedance

4 Ω

Frequency Response

80 ÷ 23k Hz

Sensitivity

91 dB/Spl

Magnet

High density flux ferrite

Dome

Water-repellent pressed paper

 

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
4" Speakers
R0.00
HERTZ CENTO CX690 (CX690)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY.

HERTZ CENTO CX690
3 way 6x9 speakers

The three-way elliptical coax CX 690 featuring a 6×9 in. cone was designed to achieve maximum performance in horizontal installations and offering, even in this difficult condition, an exceptional tone balance and power handling.

1. 6×9 in. semi-pressed paper elliptical cone SPP-M (Semi Pressed Paper-Mica) enhanced with Mica powder for an excellent balance between lightness and damping. 
2. Wide rubber suspension engineered for a long excursion and excellent sound damping. 
3. High-density flux ferrite magnet combined with low-carbon polar plates for reduced distortion at high power levels. 
4. Basket with metallic finish acoustically combined with a rubber magnet cover for total damping of spurious vibrations. 
5. 40 mm (1.58 in.) dome tweeter for efficient distortion-free mid-high frequency reproduction. 
6. 20 mm (0.8 in.) dome super tweeter to maximize the level of very high frequencies in horizontal installations. 
7. Tweeter face-plate geometry optimized with FEM simulations (Finite Element Modeling), to provide an extremely linear frequency response in off-axis installations. 
8. Provided elegant grille made with high-resistance ABS plastic structure with a metallic finish combined with a protective metal mesh.

SPP-M

SPP-M (Semi Pressed Paper-Mica) cone enhanced with Mica powder for an excellent balance between lightness and damping.

Power Handling - Peak W300
Power Handling - Continuous W100
Impedance 4
Frequency response Hz40 ÷ 23k
Sensitivity dB SPL93,5
Woofer size mm (in.)(6 x 9)
Tweeter size mm (in.)40 (1.58)
Supertweeter size mm (in.)20 (0.8)
Woofer Voice Coil Ø mm (in.)30 (1.2)
Tweeter voice coil Ø mm (in.)28 (1.1)
Woofer magnetHigh density flux ferrite
Tweeter magnetNeodymium
Woofer coneSemi Pressed Paper-Mica
Tweeter domePEI
Supertweeter domePEI

images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
3 way 6x9 speakers
R0.00
HERTZ UNO K165 (K165)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY


HERTZ UNO K165

6.5" 2 way Component System

The K 165 Uno system features a 24 mm (0.9ˈ) diaphragm Neodymium tweeter with PEI dome, for a brilliant reproduction of high frequencies in a compact size. The annular acoustic lens is optimized for exceptional off-axis performance, ensuring an accurate stereo image. The 6.5” woofers features a pressed-paper cone with foam surround, for high SPL and solid bass. The 25 mm(1ˈ) woofer voice coil driven by a high-flux density ferrite magnet offers a highly dynamic power handling for a powerful undistorted sound. The 6dB/Oct crossover is integrated on the tweeter wiring for an easy OEM upgrade.

Power Handling - Peak W300
Power Handling - Continuous W75
Impedance 4
Frequency response Hz55 ÷ 23k
Sensitivity dB SPL93,5
Voice coil Ø mm (in.)25 (1)
Woofer size mm (in.)165 (6.5)
Tweeter size mm (in.)24 (0.9)
Woofer magnetHigh density flux ferrite
Tweeter magnetNeodymium
Woofer coneWater-repellent pressed paper
Tweeter domePEI
Crossover type6 dB/Oct tweeter integrated

1. 24mm diaphragm Neodymium tweeter with PEI dome, for a brilliant reproduction of high frequencies in a compact size.
2. Annular acoustic lens optimized for exceptional off-axis performance.
3. 6dB/Oct crossover integrated on tweeter wiring.
4. Mounting accessories for external or embedded mounting included.
V 165 – Woofer:
1. V-cone® design for best off-axis response, clear mid-high frequency detail and powerful bass.
2. Foam surround combining high sensitivity and deep bass response.
3. Pure copper 25mm (1 in.) voice coil woofer for high dynamic power handling.
4. High flux density 80mm (3.15 in.) ferrite magnet for a powerful undistorted sound.
5. Easy-to-install DIN size basket protected by abrasion-resistant dust paint.

images for illustration purposes only, actual product may differ from image.
please call in or visit the store to confirm pricing and availability
E&OE
6" Split Kit
R0.00
HERTZ UNO X165 (X165)
PLEASE CALL IN OR COME IN THE STORE TO CONFIRM AVAILABILITY AND PRICING.

The 6.5” two way coaxials are available X 165 features a special designed tweeter faceplate optimized for exceptional off-axis performance to ensure a linear frequency response when installed in a factory replacement setup. The pressed-paper cone treated with water-repellent along with the foam surround provide a very high SPL and extended low frequency response, to obtain a rich sound even when driven by the OEM head unit.

The 25 mm(1ˈ) woofer voice coil driven by a high-flux density ferrite magnet offers a highly dynamic power handling for a powerful undistorted sound. The easy-to-install DIN size basket, protected by an abrasion-resistant dust paint, makes the factory speakers replacement a snap.

Power Handling - Peak W220
Power Handling - Continuous W55
Impedance 4
Frequency response Hz60 ÷ 21k
Sensitivity dB SPL93.5
Woofer size mm (in.)165 (6.5)
Tweeter size mm (in.)24 (0.9)
Woofer Voice Coil Ø mm (in.)25 (1)
Tweeter voice coil Ø mm (in.)14 (0.55)
Woofer magnetHigh density flux ferrite
Tweeter magnetNeodymium
Woofer coneWater-repellent pressed paper
Tweeter domePEI

1. Neodymium tweeter with PEI dome, for a brilliant reproduction of high frequencies and compactness.
2. Tweeter faceplate optimized for exceptional off-axis performance.
3. High stiffness metallic-grey finish pressed-paper cone with water-repellent treatment.
4. Foam surround combining high sensitivity and deep bass response.
5. Pure copper 25mm (1 in.) voice coil woofer for high dynamic power handling.
6. High flux density 80mm (3.15 in.) ferrite magnet for a powerful undistorted sound.
7. Easy-to-install DIN size basket protected by abrasion-resistant dust paint.

images for illustration purposes only, actual product may differ from image.
please call in or visit the store to confirm pricing and availability
E&OE
6" Co-Axial Speakers
R0.00
TARGA TG-102 (TG-102)
OUT OF STOCK

TARGA TG-102
2-Way 4" Speakers

4" Coaxial Speaker
300w Max Power
High Power Magnet
High Elastic Conex Damper
Titanium/Neodynium Dome Tweeter
Impedance: 4 Ohm
Frequency Range: 80-22, 000Hz

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
2-Way 4" Speakers
R0.00
HERTZ UNO X690 (X690)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY


HERTZ UNO X690
4way 6x9 speakers

For our fans seeking strong emotions who have a 6”x9” OEM setup, Hertz offers the X 690, a 4 way monster with a power handling of 340 W. The double 15 mm piezoelectric super-tweeter with PEI dome extends the frequency response above 20 kHz, maximizing the stereo image.

Power Handling - Peak W340
Power Handling - Continuous W85
Impedance Ω4
Frequency response Hz45 ÷ 22k
Sensitivity dB SPL 94
Woofer size mm (in.) 6 x 9Tweeter size mm (in.)40 (1.6)
Supertweeter size mm (in.)2 x 15 (0.6)
Woofer Voice Coil Ø mm (in.)25 (1)
Tweeter voice coil Ø mm (in.)20 (0.8)
Woofer magnet High density flux ferrite
Tweeter magnet Ferrite
Woofer cone Water-repellent pressed paper
Tweeter dome PEI
Supertweeter dome PEI

1. Double 15 mm piezoelectric super-tweeter with PEI dome to extend the frequency response above 20 kHz.
2. 40 mm PEI tweeter with ferrite motor, for a brilliant reproduction of mid-high frequencies and compactness.
3. Tweeter and super-tweeter faceplate optimized for exceptional off-axis performance.
4. High stiffness metallic-grey finish pressed-paper cone with water-repellent treatment.
5. Foam surround combining high sensitivity and deep bass response.
6. Pure copper 25mm (1 in.) voice coil woofer for high dynamic power handling.
7. High flux density 80mm (3.15 in.) ferrite magnet for a powerful undistorted sound.
8. Easy-to-install DIN size basket protected by abrasion-resistant dust paint.

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
4way 6x9 speakers
R0.00
HERTZ CENTO CPK165 (CPK165)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY


HERTZ CENTO CPK165
6" Split System

The Hertzaudio Cento Pro CPK 165 PRO car audio system includes the CP 165 woofer and the CP 25 tweeter with Tetolon dome and 25 mm voice coil, features ensuring a very wide and linear frequency response. The CP 25 employs the “Center Tuning Duct” technology: the tunnel at the center of the powerful Neodymium magnetic circuit, ensures low-temperature air exchange between the dome and the rear loading chamber, perfectly tuning the acoustics. The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage. The sophisticated design of the mobile group and suspensions of the CP 165 woofer, featuring a 60Hz calibrated resonance frequency, ensures a medium-low power with excellent punch, making listening to rich low frequency genres a unique experience. The basket is consistent with the family-feeling of the Mille line with the addition of damping and protective rubber. The cone material is inherited from the Mille Pro, as well as the suspension butyl rubber and the Tetolon fiber of the tweeter dome. These materials have excellent damping and lightness characteristics, producing a balanced sound without resonance peaks. The gift box includes the woofers grilles made of a combination of metallic mesh and high resistance ABS plastic frame. The combination of these two elements allows the user to customize the installation with a sophisticated and elegant design. 

Power Handling - Peak W315
Power Handling - Continuous W105
Impedance 4
Frequency response Hz45 ÷ 22,5k
Sensitivity dB SPL92,5
Voice coil Ø mm (in.)25 (1)
Woofer size mm (in.)165 (6.5)
Tweeter size mm (in.)29 (1.14)
Woofer magnetHigh density flux ferrite
Tweeter magnetNeodymium
Woofer conePressed-paper cone
Tweeter domeTetolon
Crossover type2 Way Passive Crossover
Crossover cut off2,8 kHz @ 12 dB Oct.


Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
6" Split System
R0.00
HERTZ DIECI DCX165 (DCX165)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY.

HERTZ DIECI DCX165

6" Co-Axial Speakers

To meet all installation needs, without giving up on Hertz quality and performance, the Dieci coaxes were designed with maniacal care to provide a linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.

Power Handling - Peak W120
Power Handling - Continuous W60
Impedance Ω4
Frequency response Hz60 ÷ 21k
Sensitivity dB SPL93
Woofer size mm (in.)165 (6.5)
Tweeter size mm (in.)15 (0.6)
Woofer Voice Coil Ø mm (in.)25 (1.0)
Woofer magnet High density flux ferrite
Tweeter magnet Neodymium
Woofer cone Water-repellent pressed paper
Tweeter dome PEI

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
6" Co-Axial Speakers
R0.00
HERTZ DIECI DSK165 (DSK165)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY.

HERTZ DIECI DSK165

6" Split Kit

Dieci car audio systems let you realize a high quality audio system with the utmost in simplicity. The woofers employ the exclusive V-cone® profile for amazing off-axis response and detailed mid-high range. The TPU (Thermoplastic polyurethane) surround ensures linearity and reduction of unwanted resonance, even at high excursion. High-performance materials, such as the neodymium motor assembly and the PEI membrane, ensure an extended high frequency range. The passive filters are found directly on the supplied connection cables, along with a rich array of accessories increasing the install-friendliness and installation time.

Power Handling - Peak W160
Power Handling - Continuous W80
Impedance 4
Frequency response Hz50 ÷ 23k
Sensitivity dB SPL93
Woofer size mm (in.)165 (6.5)
Tweeter size mm (in.)24 (0.9)
Woofer magnetHigh density flux ferrite
Tweeter magnetNeodymium
Woofer coneWater-repellent pressed paper
Tweeter domePEI
Crossover typeHi Pass
Crossover cut off3,5 kHz @ 12 dB Oct.

DSK165.3

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
6" Split Kit
R0.00
AUDISON APK130 (APK130)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY.

AUDISON APK130

5" Split Kit

APK 130

Two way system features AP 1 tweeter and AP 5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.
To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.

Comp2 way System
Size130 mm (5″) Woofer
26 mm (1″) Tweeter
46,5 x 37,5 x 20,1 mm (1.83″ x 1.47 x 0.8) Crossover
Power Handling75 W Continuous Power
225 W Peak Power
Impedance4 Ω
Frequency Response70 – 20k Hz
Sensitivity93 dB/Spl

Audison split kit
audison speaker and tweeter

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
5" Split Kit
R0.00
AUDISON APX6.5 (APX6.5)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY.

AUDISON APX6.5

APX 6.5 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.
The 6.5″ cones surround features the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.

CompTwo way coaxial
SizeWoofer 165 mm (6,5″)
Tweeter diaphragm 24 mm (0.9″)
Power Handling70 W Continuous Power
210 W Peak Power
Impedance4 Ω
Frequency Response60 ÷ 23k Hz
Sensitivity94 dB/Spl
MagnetHigh density flux ferrite
DomeWater-repellent pressed paper


Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
6" Co-Axial Speakers -70w RMS
R0.00
HERTZ ENERGY ECX130.5 (ECX 130.5)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY.



HERTZ ENERGY ECX130.5


The Energy.5 ECX 130.5 coaxial is the solution for those who want to reproduce a wide frequency range without the need of separate components: the coax tweeter adds to the woofer response optimizing the installation-friendliness.
Neodymium tweeter with built-in crossover, pressed-paper cone with deep ribbings for maximum rigidity and accurate optimization of the motor assembly contribute to enhance sound linearity, off-axis response and timbre quality. Thanks to the RHFC technology, the tweeter can be oriented, being 10° angled, to control dispersion and get close to the ideal frequency response.

Power Handling - Peak W150
Power Handling - Continuous W50
Impedance Ω4
Frequency response Hz70 ÷ 23k
Sensitivity dB SPL93
Woofer size mm (in.)130 (5)
Tweeter size mm (in.)24 (0.9)
Woofer Voice Coil Ø mm (in.)25 (1)
Tweeter voice coil Ø mm (in.)15 (0.6)
Woofer magnetHigh density flux ferrite
Tweeter magnetNeodymium
Woofer coneWater-repellent pressed paper
Tweeter domePEI


Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
5" Co-Axial Speakers
R0.00
HERTZ ENERGY ECX165.5 (ECX 165.5)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY.


HERTZ ENERGY ECX165.5


The Energy.5 ECX 165.5 car audio coaxial is the solution for those who want to reproduce a wide frequency range without the need of separate components: the coax tweeter adds to the woofer response optimizing the installation-friendliness.
Neodymium tweeter with built-in crossover, pressed-paper cone with deep ribbings for maximum rigidity and accurate optimization of the motor assembly contribute to enhance sound linearity, off-axis response and timbre quality. Thanks to the RHFC technology, the tweeter can be oriented, being 10° angled, to control dispersion and get close to the ideal frequency response.

Power Handling - Peak W210
Power Handling - Continuous W70
Impedance Ω4
Frequency response Hz60 ÷ 23k
Sensitivity dB SPL94
Woofer size mm (in.)165 (6.5)
Tweeter size mm (in.)24 (0.9)
Woofer Voice Coil Ø mm (in.)25 (1)
Tweeter voice coil Ø mm (in.)15 (0.6)
Woofer magnetHigh density flux ferrite
Tweeter magnetNeodymium
Woofer coneWater-repellent pressed paper
Tweeter domePEI

1. Water-repellent treated paper cone, butyl rubber surround.

2. Pure copper voice coil wound on aluminium former, for very good thermal
and mechanical capacity.
3. Large motor assembly for excellent mobile voice coil control.
4. Low carbon content plates for maximum magnetic permeability and high
heat dissipation.
5. Rubber magnet cover provides damping to the basket and motor structure
and protects from abrasions and damages.
6. DIN size basket coated with scratch-proof, corrosive-resistant material.
7. Tin-plated, high current terminals.
8. Silver-plated lead wires, for maximum reliability and conductivity.
9. Epoxy glue for basket and motor system provides perfect coupling.
10. Curve memory Nomex spider for consistent, reliable performance.
11. High energy neodymium magnet tweeter.
12. RHFC, Rotary High Frequency Contour; adjustable for perfect off-axis
dispersion and frequency response, according to the listening position.

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
6" 2 way speakers
R0.00
AUDISON APK165 (APK165)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY.


AUDISON APK165

Two way system features AP 1 tweeter and AP 6.5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.
To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.


Comp2 way System
Size165 mm (6.5″) Woofer
26 mm (1″) Tweeter
46,5 x 37,5 x 20,1 mm (1.83″ x 1.47 x 0.8) Crossover
Power Handling100 W Continuous Power
300 W Peak Power
Impedance4 Ω
Frequency Response60 – 20k Hz
Sensitivity93,5 dB/Spl

Audison Split kit
Audison Speaker, tweeter
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
6" Split Kit
R0.00
Hertz CPX165 (CPX165)

PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY


Hertz CPX165
6" Co-axial speakers

The CPX 165 car audio coaxial provides the thrill of listening to the Hertz sound even when the vehicle does not allow the installation of a two-way kit. The Tetolon dome tweeter and Neodymium magnet is provided with off-axis dispersion features and exceptional frequency extension for a detailed, airy sound. Radial Venting System technology ensures unparalleled cooling of the coil thanks to the eight holes at the base of the engine that allow air exchange with the tweeter supportThis acts as a rear camera, sized for low Fs, to ensure a natural mid range and allow a low frequency crossover point with the woofer. The pressed-paper cone and the butyl rubber suspension offer an extended low frequency response and an impressive punch. The Mille-inspired design basket features a dampened and protective rubber coated magnet. The grille, available as optional, is made up of a durable high resistance ABS frame and metallic mesh protection.

Power Handling - Peak W285
Power Handling - Continuous W95 RMS
Impedance 4
Frequency response Hz45 ÷ 22k
Sensitivity dB SPL92
Woofer size mm (in.)165 (6.5)
Woofer Voice Coil Ø mm (in.)25 (1)
Tweeter voice coil Ø mm (in.)20 (0.8)
Woofer magnetHigh density flux ferrite
Tweeter magnetNeodymium
Woofer conePressed-paper cone
Tweeter domeTetolon

1. Soft Tetolon fiber dome tweeter featuring a 20 mm mobile voice coil cooled with ferrofluid, for natural and extended high frequencies.
2. Radial Venting System technology including 8 venting holes for an excellent cooling of the voice coil and a natural mid range, featuring a low tweeter Fs, thanks to the air exchange with the support that acts as a large rear chamber
3. 25mm diameter pure copper coil to guarantee high excursions.
4. Pressed paper cone with FEM-optimized geometry combining rigidity and lightness for color-free sound.
5. High density ferrite magnet in combination with low carbon polar plates for a reduced distortion at high power levels.
6. 3-spoke, compact and transparent basket acoustically combined with an anti-vibration rubber magnet cover for an overall damping of spurious vibrations.
7. Stylish grille with high resistance ABS plastic frame with metal finish combined with a protective metallic mesh.

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
6" Co-axial speakers
R0.00
Hertz Mille Pro MPK165.3 (MPK165.3)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY

Hertz Mille Pro MPK165.3

6" split kit

The MPK 165.3 car audio speakers system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the MP 165.3 woofer boast outstanding dispersion features and generates high SPL with compact dimensions. The dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the  MP 165.3 woofers , ensuring a natural transition towards the MP 25.3 tweeter, for maximum natural acoustic emission. The 1mm low parasitic resistance copper filter coil of the woofer maximizes its efficiency. The MPCX 2.3 crossover features tweeter level (0/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one.

Power Handling - Peak W220
Power Handling - Continuous W110
Impedance 4
Frequency response Hz40 ÷ 22,5k
Sensitivity dB SPL92
Voice coil Ø mm (in.)25 (1)
Woofer size mm (in.)165 (6.5)
Tweeter size mm (in.)29 (1.14)
Woofer magnetHigh density flux ferrite
Tweeter magnetNeodymium
Woofer conePressed-pulp cone with cotton fibers
Tweeter domeTetolon
Crossover type2 Way Passive Crossover
Crossover cut off3,5 kHz


Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
6" split kit
R0.00
Hertz DCX690.3 (DCX690.3)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY


Hertz Dieci DCX690.3

6x9 speakers

An authentic 3-way coax capable of reproducing a wide frequency spectrum. The DCX 690.3 car audio coaxials uses an oversized magnetic group, TPU (Thermoplastic polyurethane) surround, a 60 mm diameter midrange and a PEI dome tweeter. The result is linearity, wide dispersion and extra-ordinary efficiency not found in traditional coax components. An involving, emotional sound, even at high SPL levels.

Power Handling - Peak W180
Power Handling - Continuous W90
Impedance 4
Frequency response Hz45 ÷ 21k
Sensitivity dB SPL93
Voice coil Ø mm (in.)25 (1.0
Woofer size mm (in.)(6.0 x 9.0)
Tweeter size mm (in.)60 (2.5)
Woofer magnetHigh density flux ferrite
Tweeter magnetHigh density flux ferrite
Woofer coneWater-repellent pressed paper
Tweeter domeWater-repellent pressed paper
6x9 speakers
R0.00
Hertz ESK165.5 (ESK165.5)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY

Hertz ESK165.5
6" Split Kit

ESK 165.5 is a two-way car audio systems, employing the proprietary ET 26.5 tweeter, the EV 165.5 woofer and the specific CX 200.5 crossover, creating a combination of hi-tech products to ensure thrilling acoustic performance.
Excellent frequency response, high level of installation friendliness even with OEM placements, efficiency and appealing design: the Energy.5 systems comprise and contain the whole sound philosophy of Energy. Pure energy for listening pleasure.

Power Handling - Peak W300
Power Handling - Continuous W100
Impedance 4
Frequency response Hz60 ÷ 23k
Sensitivity dB SPL93,5
Voice coil Ø mm (in.)25 (1)
Woofer size mm (in.)165 (6.5)
Tweeter size mm (in.)26 (1)
Woofer magnetHigh density flux ferrite
Tweeter magnetNeodymium
Woofer coneWater-repellent pressed paper
Tweeter domeTetolon
Crossover typeLP/HP
Crossover cut off3 kHz - 6/12 dB Oct.


V-CONE®

The exponential profile gets very close to the perfect one, providing exceptional dispersion.

Hertz car audio

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
6" Component System
R0.00
Hertz DCX130.3 (DCX130.3)
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY


Hertz DCX130.3

5" 2 way Co-axial Speakers

To meet all installation needs, without giving up on Hertz quality and performance, The Dieci DCX 130.3 car audio coaxials were designed with maniacal care to provide a linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.

Power Handling - Peak W80
Power Handling - Continuous W40
Impedance 4
Frequency response Hz65 ÷ 21k
Sensitivity dB SPL93
Voice coil Ø mm (in.)25 (1.0)
Woofer size mm (in.)130 (5.0)
Tweeter size mm (in.)15 (0.6)
Woofer magnetHigh density flux ferrite
Tweeter magnetNeodymium
Woofer coneWater-repellent pressed paper
Tweeter domePEI

Speaker Grille not included

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
5" Co-axial Speakers
R0.00
PIONEER TS-R1051S (TS-R1051S)
PIONEER TS-R1051S - 4" Speakers

Our sporty looking TS-R speakers tap the full potential of your in-car audio setup. Aimed at providing loud and clear output for any type of music, their sound quality results from a multi-layer mica matrix woofer cone which ensures punching bass and improved mid-range frequency response. You’ll enjoy a sound that is more accurate, with a full-bodied bass.

MMM Cone - enjoy a wider dispersion of sound with deeper bass through the Multi-layer Mica matrix cone.

Frequency response34 - 27,000
Weight0.35 kg
Sensitivity88 dB
Cut-out Hole106 mm
Lowest resonance frequency88 Hz
Mounting Depth43 mm
Maximum power210 W
MMM Cone
Nominal input power30 W
Woofer materialIMPP Composite Cone
Midrange size30 mm
Midrange materialPET
Tweeter size10 mm
Tweeter materialPET
Voice Coil typeCopper
Voice Coil bobbin typeKAPTON
Coaxial Speakers
MagnetsY35
Size10 cm
3 way
Impedance4 Ω


Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
4" Speakers
R399.99
Per Page      1 - 20 of 45