5" Speakers
HERTZ ENERGY ECX130.5
The Energy.5 ECX 130.5 coaxial is the solution for those who want to reproduce a wide frequency range without the need of separate components: the coax tweeter adds to the woofer response optimizing the installation-friendliness.
Neodymium tweeter with built-in crossover, pressed-paper cone with deep ribbings for maximum rigidity and accurate optimization of the motor assembly contribute to enhance sound linearity, off-axis response and timbre quality. Thanks to the RHFC technology, the tweeter can be oriented, being 10° angled, to control dispersion and get close to the ideal frequency response.
Power Handling - Peak W | 150 |
Power Handling - Continuous W | 50 |
Impedance Ω | 4 |
Frequency response Hz | 70 ÷ 23k |
Sensitivity dB SPL | 93 |
Woofer size mm (in.) | 130 (5) |
Tweeter size mm (in.) | 24 (0.9) |
Woofer Voice Coil Ø mm (in.) | 25 (1) |
Tweeter voice coil Ø mm (in.) | 15 (0.6) |
Woofer magnet | High density flux ferrite |
Tweeter magnet | Neodymium |
Woofer cone | Water-repellent pressed paper |
Tweeter dome | PEI |
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
Hertz DCX130.3
5" 2 way Co-axial Speakers
To meet all installation needs, without giving up on Hertz quality and performance, The Dieci DCX 130.3 car audio coaxials were designed with maniacal care to provide a linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.
Power Handling - Peak W | 80 |
Power Handling - Continuous W | 40 |
Impedance Ω | 4 |
Frequency response Hz | 65 ÷ 21k |
Sensitivity dB SPL | 93 |
Voice coil Ø mm (in.) | 25 (1.0) |
Woofer size mm (in.) | 130 (5.0) |
Tweeter size mm (in.) | 15 (0.6) |
Woofer magnet | High density flux ferrite |
Tweeter magnet | Neodymium |
Woofer cone | Water-repellent pressed paper |
Tweeter dome | PEI |
Speaker Grille not included
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
Powerbass PSK1350
5.25" 4-Way Co-axial Speakers
300WInjection Cone
4-Way
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
PIONEER TS-G1320F
13cm 2-Way Coaxial Speakers (250W)
Discover the renewed G-series
The improved G-series speaker range is specifically developed for premium and powerful audio, with excellent value for money. Their rigid design has been optimised with multi-bolt patterns, making it very easy to install any G-series speaker in your car. Thanks to their increased power handling and high sensitivity performance, these speakers reproduce deep, impactful bass and natural highs – even at high volumes.
TS-G1320F
Upgrade your in-car sound in a smart and affordable way with the TS-G1320F. This 13cm 2-way coaxial speaker delivers up to 35 Watts of nominal power and has a maximum power output of 250 Watts.
IMPPTM enjoy outstanding midbass response with the Blue Injection Molded Polypropylene Cone.
Coaxial Speakers | |
Size | 13 cm (5") |
Impedance | 4 Ω |
Frequency response | 33 - 24 000 |
Sensitivity | 88 dB |
Lowest resonance frequency | 101 Hz |
Maximum power | 250 W |
Nominal input power | 35 W |
Woofer material | IMPP Composite Cone |
Midrange size | 30 mm |
Midrange material | PET |
Voice Coil type | Copper |
Voice Coil bobbin type | KAPTON |
Magnets | Y35 |
Weight | 0.40 kg |
Cut-out Hole | 121 mm |
Mounting Depth | 44.3 mm |
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
13cm (5.1”) 3-Way Coaxial Speakers
Enjoy soaring highs and rich lows with these 3-way speakers. A woofer, tweeter, and super tweeter all work together for full-frequency audio that fills the whole car, and sound stays clear even at loud volumes with distortion free audio with high power handling.
HOP aramid carbon fibre matrix woofer for rich bass and clear vocals
Space-saving, easy-to-install design
Experience high performance power handling
Super tweeter for high frequency extension
Frequency range of 65Hz–24kHz
SIZE 13cm, 5" 1/4
PEAK POWER 230W
RMS POWER 35W
RATED POWER 30W
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
Built to Handle High Power The new Type-G Series of component and coaxial speakers are designed and built to handle high power levels. This speaker also delivers good sound quality, due to a soft dome tweeter, square voice coil wire with Kapton bobbin and an audio tuned capacitor.
FEATURES
Tweeter
- Tweeter Type: 20mm Silk Soft Dome Tweeter
- Magnet Material: Neodymium Magnet
Woofer
- Cone Material: Polypropylene Cone Pearl Mica Injection
- Voice Coil Type: Square Voice Coil Wire
- Magnet: Ferrite Magnet
- Frame: Injection Mold Frame
- Design: Long Excursion Design
SPECIFICATIONS
Power Handling
- Peak Power: 200 W
- RMS Power: 50 W
Dimensions
- Woofer Mounting Diameter: 11.0 cm
- Woofer Mounting Depth: 4.3 cm
General
- Frequency Response: 82 Hz to 20 kHz
- Impedance: 4 Ω
- Sensitivity: 87.5dB / W (1m)
images for illustration purposes only, actual product may differ from image.
please call in or visit the store to confirm pricing and availability
E&OE
5" Speakers
5-1/4" (13.5 cm) Coaxial 2-Way S-Series Speakers
The S-Series delivers amazingly high performance for this class of speaker. They boast the world’s first use of a CFRP diaphragm (Carbon Fiber Reinforced Plastic), which has the ideal balance of hardness and light-weight, for extremely clean and accurate sound. They also feature a larger voice coil than previous types for higher driving power, and the same HAMR surround as used on the X-Series.
Peak Power: 170 Watts
RMS Power: 55 Watts
Frequency Response: 80 Hz - 22 kHz
Introducing the S-Series speaker line
The all-new Alpine S-Series speakers offer an amazing price vs. performance ratio and come in many configurations. They are perfect for OEM upgrades with many sizes to choose from to suit a wide variety of vehicles.
HAMR Surround
Alpine’s patented H.A.M.R. (High Amplitude Multi-Roll) surround is now found on the S-Series speakers. This proven technology increases excursion while maintaining accuracy and linearity. The multi-roll design allows an even unfolding of the surround, which creates incredible linearity and colorization rejection.
Powerful Speaker Motor
The S-Series speakers have a large voice coil. The 6.5-inch and 6x9-inch models for example feature a 35-mm voice coil, and this large voice coil size increases their driving power and control of the motor.
CFRP Cone
The S-Series speakers are the first in the industry to use a material called CFRP (Carbon Fiber Reinforced Plastic), a very lightweight yet rigid material. On a standard, off-the-shelf oval cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance.
FEATURES
Woofer
- CFRP (Carbon Fiber Reinforced Plastic) cone with spezialised rubber surround
- HAMR (High Amplitude Multi-Roll) Surround
- 25 mm Voice Coil
- Magnet Material: Ferrite
- Grill sold separately: KTE-S50G
Tweeter
- Tweeter Type: 1" Wide-Range Silk Dome
- Magnet Material: Neodymium
Crossover Network
- Grade: 2nd order Network Design
SPECIFICATIONS
Power Handling
- Peak Power: 170 Watts
- RMS Power: 55 Watts (CTA-2031 Compliant)
Dimensions Woofer
- Frame 129 mm
- Mounting Depth: 49.9 mm
- Mounting Height: 15.9 mm
- Magnet: 80.0 mm
General
- Frequency Range: 80 Hz - 22 kHz
- Impedance: 4 Ohms
- Sensitivity: 87 dB/W
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
- 1