6" Speakers
The 6.5” two way coaxials are available X 165 features a special designed tweeter faceplate optimized for exceptional off-axis performance to ensure a linear frequency response when installed in a factory replacement setup. The pressed-paper cone treated with water-repellent along with the foam surround provide a very high SPL and extended low frequency response, to obtain a rich sound even when driven by the OEM head unit.
The 25 mm(1ˈ) woofer voice coil driven by a high-flux density ferrite magnet offers a highly dynamic power handling for a powerful undistorted sound. The easy-to-install DIN size basket, protected by an abrasion-resistant dust paint, makes the factory speakers replacement a snap.
Power Handling - Peak W | 220 |
Power Handling - Continuous W | 55 |
Impedance Ω | 4 |
Frequency response Hz | 60 ÷ 21k |
Sensitivity dB SPL | 93.5 |
Woofer size mm (in.) | 165 (6.5) |
Tweeter size mm (in.) | 24 (0.9) |
Woofer Voice Coil Ø mm (in.) | 25 (1) |
Tweeter voice coil Ø mm (in.) | 14 (0.55) |
Woofer magnet | High density flux ferrite |
Tweeter magnet | Neodymium |
Woofer cone | Water-repellent pressed paper |
Tweeter dome | PEI |
1. Neodymium tweeter with PEI dome, for a brilliant reproduction of high frequencies and compactness.
2. Tweeter faceplate optimized for exceptional off-axis performance.
3. High stiffness metallic-grey finish pressed-paper cone with water-repellent treatment.
4. Foam surround combining high sensitivity and deep bass response.
5. Pure copper 25mm (1 in.) voice coil woofer for high dynamic power handling.
6. High flux density 80mm (3.15 in.) ferrite magnet for a powerful undistorted sound.
7. Easy-to-install DIN size basket protected by abrasion-resistant dust paint.
images for illustration purposes only, actual product may differ from image.
please call in or visit the store to confirm pricing and availability
E&OE
HERTZ DIECI DCX165
6" Co-Axial Speakers
To meet all installation needs, without giving up on Hertz quality and performance, the Dieci coaxes were designed with maniacal care to provide a linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.
Power Handling - Peak W120
Power Handling - Continuous W60
Impedance Ω4
Frequency response Hz60 ÷ 21k
Sensitivity dB SPL93
Woofer size mm (in.)165 (6.5)
Tweeter size mm (in.)15 (0.6)
Woofer Voice Coil Ø mm (in.)25 (1.0)
Woofer magnet High density flux ferrite
Tweeter magnet Neodymium
Woofer cone Water-repellent pressed paper
Tweeter dome PEI
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
AUDISON APX6.5
APX 6.5 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.
The 6.5″ cones surround features the exclusive shallow “Triple Wave” profile, for maximum excursion linearity.
Comp | Two way coaxial |
Size | Woofer 165 mm (6,5″) Tweeter diaphragm 24 mm (0.9″) |
Power Handling | 70 W Continuous Power 210 W Peak Power |
Impedance | 4 Ω |
Frequency Response | 60 ÷ 23k Hz |
Sensitivity | 94 dB/Spl |
Magnet | High density flux ferrite |
Dome | Water-repellent pressed paper |
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
HERTZ ENERGY ECX165.5
The Energy.5 ECX 165.5 car audio coaxial is the solution for those who want to reproduce a wide frequency range without the need of separate components: the coax tweeter adds to the woofer response optimizing the installation-friendliness.
Neodymium tweeter with built-in crossover, pressed-paper cone with deep ribbings for maximum rigidity and accurate optimization of the motor assembly contribute to enhance sound linearity, off-axis response and timbre quality. Thanks to the RHFC technology, the tweeter can be oriented, being 10° angled, to control dispersion and get close to the ideal frequency response.
Power Handling - Peak W | 210 |
Power Handling - Continuous W | 70 |
Impedance Ω | 4 |
Frequency response Hz | 60 ÷ 23k |
Sensitivity dB SPL | 94 |
Woofer size mm (in.) | 165 (6.5) |
Tweeter size mm (in.) | 24 (0.9) |
Woofer Voice Coil Ø mm (in.) | 25 (1) |
Tweeter voice coil Ø mm (in.) | 15 (0.6) |
Woofer magnet | High density flux ferrite |
Tweeter magnet | Neodymium |
Woofer cone | Water-repellent pressed paper |
Tweeter dome | PEI |
1. Water-repellent treated paper cone, butyl rubber surround.
2. Pure copper voice coil wound on aluminium former, for very good thermal
and mechanical capacity.
3. Large motor assembly for excellent mobile voice coil control.
4. Low carbon content plates for maximum magnetic permeability and high
heat dissipation.
5. Rubber magnet cover provides damping to the basket and motor structure
and protects from abrasions and damages.
6. DIN size basket coated with scratch-proof, corrosive-resistant material.
7. Tin-plated, high current terminals.
8. Silver-plated lead wires, for maximum reliability and conductivity.
9. Epoxy glue for basket and motor system provides perfect coupling.
10. Curve memory Nomex spider for consistent, reliable performance.
11. High energy neodymium magnet tweeter.
12. RHFC, Rotary High Frequency Contour; adjustable for perfect off-axis
dispersion and frequency response, according to the listening position.
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
PLEASE CALL US OR COME INTO THE STORE FOR PRICING AND AVAILABILITY
Hertz CPX165
6" Co-axial speakers
The CPX 165 car audio coaxial provides the thrill of listening to the Hertz sound even when the vehicle does not allow the installation of a two-way kit. The Tetolon dome tweeter and Neodymium magnet is provided with off-axis dispersion features and exceptional frequency extension for a detailed, airy sound. Radial Venting System technology ensures unparalleled cooling of the coil thanks to the eight holes at the base of the engine that allow air exchange with the tweeter support. This acts as a rear camera, sized for low Fs, to ensure a natural mid range and allow a low frequency crossover point with the woofer. The pressed-paper cone and the butyl rubber suspension offer an extended low frequency response and an impressive punch. The Mille-inspired design basket features a dampened and protective rubber coated magnet. The grille, available as optional, is made up of a durable high resistance ABS frame and metallic mesh protection.
Power Handling - Peak W | 285 |
Power Handling - Continuous W | 95 RMS |
Impedance Ω | 4 |
Frequency response Hz | 45 ÷ 22k |
Sensitivity dB SPL | 92 |
Woofer size mm (in.) | 165 (6.5) |
Woofer Voice Coil Ø mm (in.) | 25 (1) |
Tweeter voice coil Ø mm (in.) | 20 (0.8) |
Woofer magnet | High density flux ferrite |
Tweeter magnet | Neodymium |
Woofer cone | Pressed-paper cone |
Tweeter dome | Tetolon |
1. Soft Tetolon fiber dome tweeter featuring a 20 mm mobile voice coil cooled with ferrofluid, for natural and extended high frequencies.
2. Radial Venting System technology including 8 venting holes for an excellent cooling of the voice coil and a natural mid range, featuring a low tweeter Fs, thanks to the air exchange with the support that acts as a large rear chamber
3. 25mm diameter pure copper coil to guarantee high excursions.
4. Pressed paper cone with FEM-optimized geometry combining rigidity and lightness for color-free sound.
5. High density ferrite magnet in combination with low carbon polar plates for a reduced distortion at high power levels.
6. 3-spoke, compact and transparent basket acoustically combined with an anti-vibration rubber magnet cover for an overall damping of spurious vibrations.
7. Stylish grille with high resistance ABS plastic frame with metal finish combined with a protective metallic mesh.
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
16cm (6.5”) 3-Way Coaxial Speakers
Take your on-road audio further with these 3-way speakers. A woofer, tweeter, and super tweeter all work together for full-frequency audio that fills the whole car, and sound stays clear even at loud volumes with distortion free audio with high power handling.
HOP aramid carbon fibre matrix woofer for rich bass and clear vocals
Super tweeter for high frequency extension
Experience high performance power handling
Frequency range of 55Hz–24kHz
Space-saving, easy-to-install design
SIZE 16cm, 6" 1/2
PEAK POWER 260W
RMS POWER 45W
RATED POWER 40W
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
SONY XS-GTF1639
16cm 3-way speakers
Blast out your favorite driving songs with the XS-GTF1639 3-way speakers. Featuring a HOP Aramid Carbon Fiber Matrix cone woofer for punchy bass, and high-power handling to pump up the volume without affecting sound quality.
HOP Aramid Carbon Fiber Matrix cone woofer for deep, powerful bass
Super tweeter for high frequency extension
Ideally designed for Sony head units with EXTRA BASS circuitry
Space-saving, easy-to-install design
High-power handling with 270W max and 45W RMS
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
6" (16cm) 3-way speaker
6-1/2" 3-Way Coaxial Speaker
- 320 Watts Max Power (70 Watts Nominal)
- 11mm polyethylene terephthalate (PET) hard dome tweeter
- 1-5/8. cellulose fiber cone midrange
- 6-1/2. carbon and mica reinforced
Easily Upgrade to High Performance
Pioneer’s A-series sound design purposely matches the subwoofer and full-range loudspeakers to provide seamless and smooth sound characteristics with dynamic, high impact bass that lets you hear and feel the music.
OPEN & SMOOTH
Pioneer’s OPEN & SMOOTH sound concept provides a seamless and smooth transition between the midrange and tweeter drivers and delivers uniform off-axis frequency response optimized for automotive applications where one or more speakers are often aimed away from the listeners’ ears.
CarSoundFit App
Pioneer’s CarSoundFit app is actually a car sound simulator for experiencing in-car sound with your own smartphone. Hear the difference between original car speakers and different Pioneer audio upgrades: convince yourself of the level of quality Pioneer can offer for your vehicle. For a virtual listening demonstration of these and many other Pioneer car speakers, download the free Pioneer CarSoundFit app.
SYSTEM
- 3-way Coaxial
- 87 dB (+- 1.5dB)
- 37 Hz to 24 kHz
- 70 Watts
- 320 Watts
- 4 ohms
WOOFER
- 6-1/2”
- Carbon and mica reinforced IMPP
- Elastic polymer
- Ferrite
- 7.6 oz.
- 1-7/8"
TWEETER
- Polyethylene terephthalate (PET) hard dome
- 11mm
CROSSOVER NETWORK
- 4,600 Hz
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
Alpine SPG-17C2
Type-G 6-3/4" 2-way car speakers — fits 6-3/4" and 6-1/2" openings
Built to Handle High Power The new Type-G Series of component and coaxial speakers are designed and built to handle high power levels. This speaker also delivers good sound quality, due to a soft dome tweeter, square voice coil wire with Kapton bobbin and an audio tuned capacitor.
FEATURES
Tweeter
- Tweeter Type: 20mm Silk Soft Dome Tweeter
- Magnet Material: Neodymium Magnet
Woofer
- Cone Material: Polypropylene Cone Pearl Mica Injection
- Voice Coil Type: Square Voice Coil Wire
- Magnet: Ferrite Magnet
- Frame: Injection Mold Frame
- Design: Long Excursion Design
SPECIFICATIONS
Power Handling
- Peak Power: 240 W
- RMS Power: 60 W
Dimensions
- Woofer Mounting Diameter: 14.1 cm
- Woofer Mounting Depth: 6.1 cm
General
- Frequency Response: 68 Hz to 20 kHz
- Impedance: 4 Ω
- Sensitivity: 88.5dB / W (1m)
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
16cm (6.5") 2-Way Coaxial Marine Speaker
Enjoy powerful sound with 45W power handling
16.5cm (6.5”) 2-way speaker design
Hear rich bass and clear vocals with a rigid woofer cone structure
IPx5 certified for marine use
Hear soaring highs and resounding lows with a wide 45–20000Hz frequency range
CONFIGURATION
6.5" Coaxial Full-Range 2 Way
SIZE
16 cm
RATED POWER
160W
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
MP3 USB Frontloader with 6" speakers
Conveniently control your compatible Android smartphone directly from your car dashboard. Enjoy songs from your music library in superior sound quality, while charging the battery.
Pioneer’s legendary Supertuner IIID combines the best of digital and analog tuner technologies to reduce distortion to bring you exceptional FM and AM performance.
Adjust your audio output in detail for a music experience tailored to your preferences.
Pioneer’s ARC app converts your compatible iPhone or Android smartphone into a powerful touchscreen remote, enabling you to maximize the potential of your compatible Pioneer headunit.
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
16cm (6.3") 2-Way Coaxial Speakers
Enjoy high power 320W peak and 75W rated power output
A Mica Reinforced Cellular Woofer (MRC) cone adds extra rigidity for low, accurate bass tones
25mm Soft Dome Tweeters for smooth audio highs and wider dispersion
Acoustic distortion is minimised by a rubber surround
SIZE
16 cm, 6'1/2
PEAK POWER
320W
RATED POWER
75W
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
- 1