Subwoofers

all the difference subwoofers to enhance the bass in your vehicle or boat or caravan or where ever you choose to install the subwoofer
Sort By:  
6" subwoofer
R449.99
Targa TG-P124D Predator 5000W DVC 12" Subwoofer
R699.99
R799.99
30 cm 4Ω enclosure-type single voice coil subwoofer (1500W)
R849.99
R949.99
10" Champion Series Subwoofer with Single 4 Ohm Voice Coil
R849.99
Targa Street TG-1204D4 600W RMS DVC-4 12" Subwoofer
R849.99
10" Champion Series Subwoofer with Dual 4 Ohm Voice Coil
R899.99
12" Champion Series Subwoofer with Dual 4 Ohm Voice Coil
R949.99
12" 2000w Subwoofer
R949.99
10" (25cm) Subwoofer (4Ohm)
R1,099.99
10“ (25cm) Subwoofer (4Ohm)
R1,499.99
15" Subwoofer
R1,549.99
15" XXX Subwoofer
R1,599.99
12" Subwoofer
R1,599.99
12" (30cm) Subwoofer (4Ohm)
R1,749.99
8" active subwoofer
R1,749.99
Reference R3 8″ Dual 2-ohm Subwoofer, 500w RMS
R1,899.99
12" DVC Subwoofer
R2,399.99
10” Single 4 ohms Voice Coil Subwoofer
R2,599.99
10" Subwoofer
R2,799.99
Reference R3 12″ Dual 2-ohm Subwoofer, 800w RMS
R3,249.99
TARGA TG-604DW (TG-604DW)
TARGA TG-604DW

TARGA TG-604DW

3000W DVC 6" Subwoofer

Max Power: 3000W
Rated Power: 300W x2
Impedance: 4 Ohms x2 (DVC)

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE

6" subwoofer
R449.99
TARGA TG-P124D4 (TG-P124D4)
TARGA TG-P124D4
12" Predator Subwoofer


5000w Peak Power
FS (Free Air resonance) - 33.5Hz
SPL (Efficiency, 1W/1M) - 89.5dB
Nominal Impedance - 2/4/8 Ohms
Qts (total speaker "Q") - 0.54
Qes (Electrical "Q") - 0.60
Qms (Mechanical "Q") - 4.80
Vas (Equivalent compliance) - 72.5
Mounting Depth: 143mm
Mounting Hole Diameter: 276mm

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
Targa TG-P124D Predator 5000W DVC 12" Subwoofer
R699.99
R799.99
PIONEER TS-A300S4 (TS-A300S4)
PIONEER TS-A300S4
30cm (12") 4Ω enclosure-type single voice coil subwoofer (1500W)

Upgrade the original sound system of your car. Our A-series subwoofers compliment our A-series speakers to give you that sound upgrade solution that you have been looking for.

The A-series subwoofers combine superior high quality sound, design and technology, along with carefully selected materials to improve bass response.  

IMPPTM enjoy outstanding midbass response with the Blue Injection Molded Polypropylene Cone.

Woofer Size30 cm (12")
TypeS4 / Single Voice Coil
Max Power1500 Watt
Continuous power output500 W
Impedance4 Ω
TerminalsPush Type

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
30 cm 4Ω enclosure-type single voice coil subwoofer (1500W)
R849.99
R949.99
PIONEER TS-W261S4 (TS-W261S4)
PIONEER TS-W261S4

10" Champion Series Subwoofer with Single 4 Ohm Voice Coil

  • IMPP Composite Cone
  • Dual-Layer Elastic Polymer Surround
  • Single Piece Basket Design

RE-DESIGNED. RE-ENGINEERED. REMARKABLE.

Reinforced Cone Structure

Pioneer’s IMPP Composite Cone is newly re-designed to deliver a durable cone structure for accurate, yet powerful bass. The subwoofer now provides a single piece cone and drive cone, in addition to a lightweight and rigid dust cap. This combination offers more rigidity throughout the cone versus competitors in its class. An extremely durable, yet lightweight cone is vital to prevent cone failure at high sound pressure levels.

Single Piece Basket

The TS-W261S4 utilizes a highly rigid, fully-enclosed, single piece basket, derived from our world-record holding SPL competition subwoofers, to help minimize the vibration throughout the subwoofer and increase the driving force to the cone, producing louder and rhythmical bass. Improved stiffness of the basket provides for less sound leaks creating more clear and powerful bass.

With the TS-W261S4, engineers re-designed the spider assembly to allow the subwoofer to produce more accurate and rich bass. Taking notes from our high-end SPL competition and Reference Series speakers, the spider is now assembled onto the spider holder rather than directly on to the basket. Since the cone is also assembled onto the basket which can cause additional vibration, the independent structure of the spider holder helps minimize vibration coming from the cone. This improves playback response, sound outline, and provides high linearity.

Cooling and Ventilation

All fast moving parts and friction will create heat and too much heat creates unwanted audio results. The TS-W261S4 is designed with ventilation holes to improve air flow and release heat keeping the piston cool for better performance.

GENERAL
  • 10"
  • 1200W (350W)
  • IMPP Composite Cone
  • Dual Layer Fiber Reinforced Elastic Polymer Surround
  • 4 Ohms
  • 20Hz - 125Hz (-20 dB)
  • 93 dB

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
10" Champion Series Subwoofer with Single 4 Ohm Voice Coil
R849.99
TARGA TG-1204DW (TG-1204DW)
TARGA TG-1204DW
Targa Street TG-1204D4

Targa Street TG-1204D4 600W RMS DVC-4 12″ Subwoofer
6000W Peak Power
FS (Free Air resonance) – 32.1Hz
SPL (Efficiency, 1W/1M) – 89.1dB
Nominal Impedance – 2/4/8 Ohms
Qts (total speaker “Q”) – 0.42
Qes (Electrical “Q”) – 0.46
Qms (Mechanical “Q”) – 4.74
Vas (Equivalent compliance) – 75.9L
Mounting Depth: 162mm
Mounting Hole Diameter: 280mm

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
Targa Street TG-1204D4 600W RMS DVC-4 12" Subwoofer
R849.99
PIONEER TS-W261D4 (TS-W261D4)
PIONEER TS-W261D4

10" Champion Series Subwoofer with Dual 4 Ohm Voice Coil

  • IMPP Composite Cone
  • Dual-Layer Elastic Polymer Surround
  • Single Piece Basket Design

RE-DESIGNED. RE-ENGINEERED. REMARKABLE.

Reinforced Cone Structure

Pioneer’s IMPP Composite Cone is newly re-designed to deliver a durable cone structure for accurate, yet powerful bass. The subwoofer now provides a single piece cone and drive cone, in addition to a lightweight and rigid dust cap. This combination offers more rigidity throughout the cone versus competitors in its class. An extremely durable, yet lightweight cone is vital to prevent cone failure at high sound pressure levels.

Single Piece Basket

The TS-W261D4 utilizes a highly rigid, fully-enclosed, single piece basket, derived from our world-record holding SPL competition subwoofers, to help minimize the vibration throughout the subwoofer and increase the driving force to the cone, producing louder and rhythmical bass. Improved stiffness of the basket provides for less sound leaks creating more clear and powerful bass.

New Spider Assembly
With the TS-W261D4, engineers re-designed the spider assembly to allow the subwoofer to produce more accurate and rich bass. Taking notes from our high-end SPL competition and Reference Series speakers, the spider is now assembled onto the spider holder rather than directly on to the basket. Since the cone is also assembled onto the basket which can cause additional vibration, the independent structure of the spider holder helps minimize vibration coming from the cone. This improves playback response, sound outline, and provides high linearity.

Cooling and Ventilation

All fast moving parts and friction will create heat and too much heat creates unwanted audio results. The TS-W261D4 is designed with ventilation holes to improve air flow and release heat keeping the piston cool for better performance.

GENERAL
  • 10"
  • 1200W (350W)
  • IMPP Composite Cone
  • Dual Layer Fiber Reinforced Elastic Polymer Surround
  • 4 Ohms x 2
  • 20Hz - 125Hz (-20 dB)
  • 93 dB
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
10" Champion Series Subwoofer with Dual 4 Ohm Voice Coil
R899.99
PIONEER TS-W311D4 (TS-W311D4)

PIONEER TS-W311D4
12" Champion Series Subwoofer with Dual 4 Ohm Voice Coil

  • IMPP Composite Cone
  • Dual-Layer Elastic Polymer Surround
  • Single Piece Basket Design

RE-DESIGNED. RE-ENGINEERED. REMARKABLE.

Reinforced Cone Structure

Pioneer’s IMPP Composite Cone is newly re-designed to deliver a durable cone structure for accurate, yet powerful bass. The subwoofer now provides a single piece cone and drive cone, in addition to a lightweight and rigid dust cap. This combination offers more rigidity throughout the cone versus competitors in its class. An extremely durable, yet lightweight cone is vital to prevent cone failure at high sound pressure levels.

Single Piece Basket

The TS-W311D4 utilizes a highly rigid, fully-enclosed, single piece basket, derived from our world-record holding SPL competition subwoofers, to help minimize the vibration throughout the subwoofer and increase the driving force to the cone, producing louder and rhythmical bass. Improved stiffness of the basket provides for less sound leaks creating more clear and powerful bass.

With the TS-W311D4, engineers re-designed the spider assembly to allow the subwoofer to produce more accurate and rich bass. Taking notes from our high-end SPL competition and Reference Series speakers, the spider is now assembled onto the spider holder rather than directly on to the basket. Since the cone is also assembled onto the basket which can cause additional vibration, the independent structure of the spider holder helps minimize vibration coming from the cone. This improves playback response, sound outline, and provides high linearity.

Cooling and Ventilation

All fast moving parts and friction will create heat and too much heat creates unwanted audio results. The TS-W311D4 is designed with ventilation holes to improve air flow and release heat keeping the piston cool for better performance.

  • 12"
  • 1,400W (400W)
  • IMPP Composite Cone
  • Dual Layer Fiber Reinforced Elastic Polymer Surround
  • 4 Ohms x 2
  • 20Hz - 125Hz (-20 dB)
  • 95 dB
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
12" Champion Series Subwoofer with Dual 4 Ohm Voice Coil
R949.99
SONY XS-GTR121LD (XS-GTR121LD)
SONY XS-GTR121LD
12" 2000w Subwoofer

Enjoy high 2000W maximum output power and double coil
Experience louder, deeper bass with a 30cm (12”) polypropylene cone
A dimpled woofer cone adds extra rigidity for low and accurate bass tones
Hear resounding lows with a 30–1000Hz frequency range
Premium materials ensure clear, powerful sound

SIZE 30 cm (12")
PEAK POWER 2000W
RATED POWER 420W


Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
12" 2000w Subwoofer
R949.99
ALPINE SWE-1044E (SWE-1044e)
ALPINE SWE-1044E
10" (25cm) Subwoofer (4Ohm)

Excellent bass performance plus high power handling and efficiency at a surprisingly affordable price.

FEATURES

  • Peak Power: 500W
  • RMS Power: 150 W
  • Frequency Response: 33Hz - 800Hz
  • Sensitivity: 87.1dB/W (1m)
  • Installation Diameter: 232mm
  • Depth: 116mm

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
10" (25cm) Subwoofer (4Ohm)
R1,099.99
ALPINE SWG-1044 (SWG-1044)
ALPINE SWG-1044
10“ (25cm) Subwoofer (4Ohm)

An excellent match for the Type-G speakers, the Type-G subwoofers combine impressive bass output with high power handling and efficiency, and at a comfortable price level!

Features

  • Peak Power: 500W
  • RMS Power: 150 W
  • Frequency Response: 30Hz - 1kHz
  • Sensitivity: 88.4dB/W (1m)
  • Installation Diameter: 235mm
  • Depth: 139mm

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
10“ (25cm) Subwoofer (4Ohm)
R1,499.99
TARGA TG-V154D (TG-V154D)
TARGA TG-V154D
15" Subwoofer

Viper subwoofer
  • 7000w Max Power
  • 2000w RMS
  • 15" Dual 4 Ohm

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
15" Subwoofer
R1,549.99
TARGA TG-1524D (TG-1524D)
TARGA TG-1524D
15" XXX Subwoofer

Fs (free air resonance): 29.0 Hz
SPL (efficiency, 1W/1M): 90.4 dB
Nominal Inpedance: 2/4/8 Ω
Qts (total speaker "Q"): 0.47
Qes (electrical "Q"): 0.52
Qms (mechanical "Q"): 4.46
Vas (equivalent compliance): 102.4 L
Mounting Depth: 180 mm
Mounting Hole Diameter: 355 mm

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
15" XXX Subwoofer
R1,599.99
HERTZ UNO S300 (S300)
HERTZ UNO S300

The 30 cm (12’) S 300 S4 car audio subwoofer, designed to obtain powerful deep bass in any installation, is the last addition to the Uno product range.
Thanks to the efficiency of 89.5 dB, achieved using lightweight materials such as paper for the cone and high density foam for the suspension, the component provides the ability to easily reach high sound pressures in the car compartment.
The exclusive patented V-cone® system ensures maximum stiffness through wide excursions, thus obtaining low undistorted frequencies at high volume.
The S 300 S4 is optimized for both reflex and sealed enclosures. The resonance frequency is as low as 33 Hz, a particularly low value considering the speaker’s high efficiency. This figure proves the degree of commitment of the Hertz R&D team to the project, aiming at maximizing the output quality and level. A pre-assembled gasket in ABS refines the product’s cosmetics ensuring an appealing look once installed.

Size mm (in.)300 (12)
Power Handling - Peak W1000
Power Handling - Continuous W250
Impedance 4
Sensitivity dB SPL89,5
Voice coil Ø mm (in.)38 (1.5)
Xmax mm9,1
X-mech mm (in.)±15,1 (0.59)
Re 3,6
Fs Hz33
Vas l82,2
Qts0,6
Qes0,65
Qms7,8
Spl dB89,5

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
12" Subwoofer
R1,599.99
ALPINE SWG-1244 (SWG-1244)
ALPINE SWG-1244
12" (30cm) Subwoofer (4Ohm)

An excellent match for the Type-G speakers, the Type-G subwoofers combine impressive bass output with high power handling and efficiency, and at a comfortable price level!

Features

  • Peak Power: 800W
  • RMS Power: 250W
  • Frequency Response: 28Hz - 1kHz
  • Sensitivity: 89.8dB/W (1m)
  • Installation Diameter: 282mm
  • Depth: 172mm

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
12" (30cm) Subwoofer (4Ohm)
R1,749.99
POWERBASS PB1500BK (PB1500BK)
POWERBASS PB1500BK

8" active subwoofer
amp built in

High performance amplified slimline subwoofer
PWM mosfet sower supply
RCA or speaker line input
Subwoofer remote level control
Phase switch (0 or 180 degree)
Bass boost 0-12db @ 45hz
Sub sonic filter (20-50hz)
LPF filter (50-150hz)
Power 1500w @ 4ohms
Auto power on / off
Soft delayed remote turn on
Protection circuit for thermal, short or over load
Blue led illumination indicator
Dimensions (L x W x H) 325 x 250 x 68 mm

Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
8" active subwoofer
R1,749.99
SOUNDSTREAM R3.8 (R3,8)
SOUNDSTREAM R3.8

Reference R3 8″ Dual 2-ohm Subwoofer, 500w RMS

RMS Power (watts)500
Efficiency (1w/1m)80.7
Voice Coil Configuration2.5″ DVC 2Ω

Some times a woofer comes along that changes the game. The R3 is just that. It has a high roll surround for extended excursion. With a big 2” voice coil, and a gigantic motor structure, it can handle some serious power. With unparalleled sound quality, this little woofer can get down and hang with just about any other 8” woofer out there. Weather an SPL competitor or an SQ competitor this is a woofer that can do it all.

  • Woven Fiberglass Composite Cone
    All Reference R3 woofers use fiberglass stranding woven together for ultimate strength and less elasticity. A heavy soaking in epoxy combined with the sonic qualities of pulp paper backing proves itself worthy of any system.
  • 100% OFC 4-Layer Voice Coil
    R3 woofers use generous 1.50″ long, 2.5″ diameter 100% OFC Copper voice coils. A vented Aluminum former extract and dissipate any heat build-up, resulting in improved power handling.
  • Extended Excursion Polyurethane Surround
    Polyurethane is a foam compound used in the manufacture of countless gasket and insulation products, known for its adhesive bonding properties. Reference R3 woofers utilize an extended excursion polyurethane surround for it’s strength and flexible properties during extreme movement.
  • Back Plate & T-Yoke Venting
    Heat build-up is a leading cause of catastrophic woofer failure. Venting built into the T-Yoke, back plate, and voice coil extract and dissipate heat, ensuring R3 woofers keep their cool.

SPECIFICATIONSR3.8
RMS Power (watts)500
Efficiency (1w/1m)80.7
Voice Coil Configuration2.5" DVC 2Ω
Mounting Depth5.25"
Optimum Sealed ft30.75
Optimum Ported ft31.25


Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
Reference R3 8″ Dual 2-ohm Subwoofer, 500w RMS
R1,899.99
PIONEER TS-D12D4 (TS-D12D4)

PIONEER TS-D12D4

12” Dual 4 ohms Voice Coil Subwoofer

 

  • Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP) Cone Construction
  • Butyl Rubber Surround for Strength and Linearity During High Excursion
  • Oversized 74.1 oz Double Stacked Magnet and Vented Pole Yoke for Increased Power Handling

 

D Subwoofer, FORCEFUL, DEEP, DEFINED.


Too much isn’t enough, embrace the bass. The D subwoofer is a culmination of Pioneer technologies that produce thick, deep, powerful and accurate bass that makes listening to your favorite music energetic, fun and engaging.


Combining bass quality and bass quantity with high power, plus installation flexibility that provide high performance in both acoustic suspension (sealed) and bass reflex (ported) enclosures, the D subwoofer is the ultimate all-around performer.

Slam, attack, power. Don’t just listen to your music, feel it.

BUTYL RUBBER SURROUND

Made of a specially blended, highly durable and moisture-resistant compound, butyl rubber keeps the cone moving in a linear direction, seals the cone to the basket and quickly dampens cone vibration once the signal has changed or stopped. This results in less distortion and superior frequency response.

ARAMID FIBER INTERLACED INJECTION MOLDED POLYPROPYLENE (IMPP)

Polypropylene (PP) is a tough thermoplastic resin that is an ideal material for a subwoofer cone - with low mass and high damping, PP cones offer good sensitivity and low distortion. However, polypropylene cones lack the rigidity and strength required for high output and extreme low bass. To resolve this, Pioneer engineers used advanced Computer-Aided Manufacturing to develop a process to blend aramid fibers into the polypropylene resin during the injection molding process. The resulting Aramid Fiber Interlaced IMPP subwoofer cone is incredibly strong and low mass with high rigidity and superior strength to produce deep, powerful and undistorted bass.

LARGE DIAMETER VOICE COIL AND DOUBLE STACKED MAGNETS

A subwoofer motor structure consists of the voice coil and magnet assembly. Increasing the diameter and length of the voice coil provides greater control of the woofer cone and higher power handling. To take full advantage, however, the magnet must also be increased, both in magnetic power and physical size. The D subwoofer uses an oversized 4-layer voice coil and high energy double stacked magnets to increase the overall power handling and SPL output with no sacrifice in sound quality.

SUBWOOFER

  • Sound Pressure Level (Sensitivity) 78dB (+- 1.5dB)
  • Frequency Range 20 Hz to 4.7 kHz
  • Continuous Power Handling (RMS) 600 Watts
  • Maximum Peak Power Handling 2000 Watts
  • Nominal Impedance 4 ohms Dual Voice Coil (DVC)
  • Diameter 12”
  • Cone Material Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP)
  • Center Cap Material Acrylonitrile Butadiene Styrene (ABS)
  • Surround Material Butyl Rubber
  • Basket Material Stamped Steel
  • Magnet Material Ferrite
  • Magnet Weight 74.1 oz
  • Mounting Depth 6.2”



Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE

 

12" DVC Subwoofer
R2,399.99
PIONEER TS-D10LS4 (TS-D10LS4)
PIONEER TS-D10LS4

10” Single 4 ohms Voice Coil Subwoofer


  • 10˝ Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP) cone construction
  • Butyl rubber surround for strength and linearity during high excursion
  • Shallow basket, small enclosure design for sound optimization and installation flexibility

D Subwoofer, FORCEFUL, DEEP, DEFINED.


Too much isn’t enough, embrace the bass. The D subwoofer is a culmination of Pioneer technologies that produce thick, deep, powerful and accurate bass that makes listening to your favorite music energetic, fun and engaging.

Combining bass quality and bass quantity with high power, plus installation flexibility that provide high performance in both acoustic suspension (sealed) and bass reflex (ported) enclosures, the D subwoofer is the ultimate all-around performer. Slam, attack, power. Don’t just listen to your music, feel it.

BUTYL RUBBER SURROUND

Made of a specially blended, highly durable and moisture-resistant compound, butyl rubber keeps the cone moving in a linear direction, seals the cone to the basket and quickly dampens cone vibration once the signal has changed or stopped. This results in less distortion and superior frequency response.

ARAMID FIBER INTERLACED INJECTION MOLDED POLYPROPYLENE (IMPP)

Polypropylene (PP) is a tough thermoplastic resin that is an ideal material for a subwoofer cone - with low mass and high damping, PP cones offer good sensitivity and low distortion. However, polypropylene cones lack the rigidity and strength required for high output and extreme low bass. To resolve this, Pioneer engineers used advanced Computer-Aided Manufacturing to develop a process to blend aramid fibers into the polypropylene resin during the injection molding process. The resulting Aramid Fiber Interlaced IMPP subwoofer cone is incredibly strong and low mass with high rigidity and superior strength to produce deep, powerful and undistorted bass.

LARGE DIAMETER VOICE COIL AND DOUBLE STACKED MAGNETS

A subwoofer motor structure consists of the voice coil and magnet assembly. Increasing the diameter and length of the voice coil provides greater control of the woofer cone and higher power handling. To take full advantage, however, the magnet must also be increased, both in magnetic power and physical size. The D subwoofer uses an oversized 4-layer voice coil and high energy double stacked magnets to increase the overall power handling and SPL output with no sacrifice in sound quality.

SUBWOOFER
  • 76dB (+- 1.5dB)
  • 20 Hz to 3.4 kHz
  • 350 Watts
  • 1300 Watts
  • Single 4 ohms Voice Coil (SVC)
  • 10”
  • Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP)
  • Acrylonitrile Butadiene Styrene (ABS)
  • Butyl Rubber
  • Stamped Steel
  • Ferrite
  • 43 oz
  • 3.3”
Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
10” Single 4 ohms Voice Coil Subwoofer
R2,599.99
Soundstream R3.10 (R3.10)

R3.10

Reference R3 10″ Dual 2-Ohm Subwoofer, 700w RMS

  • Woven Fiberglass Composite Cone
    All Reference R3 woofers use fiberglass stranding woven together for ultimate strength and less elasticity. A heavy soaking in epoxy combined with the sonic qualities of pulp paper backing proves itself worthy of any system.
  • 100% OFC 4-Layer Voice Coil
    R3 woofers use generous 1.50″ long, 2.5″ diameter 100% OFC Copper voice coils. A vented Aluminum former extract and dissipate any heat build-up, resulting in improved power handling.
  • Extended Excursion Polyurethane Surround
    Polyurethane is a foam compound used in the manufacture of countless gasket and insulation products, known for its adhesive bonding properties. Reference R3 woofers utilize an extended excursion polyurethane surround for it’s strength and flexible properties during extreme movement.
  • Back Plate & T-Yoke Venting
    Heat build-up is a leading cause of catastrophic woofer failure. Venting built into the T-Yoke, back plate, and voice coil extract and dissipate heat, ensuring R3 woofers keep their cool.

SPECIFICATIONSR3.10
RMS Power (watts)700
Efficiency (1w/1m)82.1
Voice Coil Configuration2.5" DVC 2Ω
Mounting Depth6.00"
Optimum Sealed ft31
Optimum Ported ft31.5


images for illustration purposes only, actual product may differ from image.
please call in or visit the store to confirm pricing and availability
E&OE
10" Subwoofer
R2,799.99
SOUNDSTREAM R3.12 (R3.12)
SOUNDSTREAM R3.12

Reference R3 12″ Dual 2-ohm Subwoofer, 800w RMS

RMS Power (watts)800
Efficiency (1w/1m)84.66
Voice Coil Configuration2.5″ DVC 2Ω

  • Woven Fiberglass Composite Cone
    All Reference R3 woofers use fiberglass stranding woven together for ultimate strength and less elasticity. A heavy soaking in epoxy combined with the sonic qualities of pulp paper backing proves itself worthy of any system.
  • 100% OFC 4-Layer Voice Coil
    R3 woofers use generous 1.50″ long, 2.5″ diameter 100% OFC Copper voice coils. A vented Aluminum former extract and dissipate any heat build-up, resulting in improved power handling.
  • Extended Excursion Polyurethane Surround
    Polyurethane is a foam compound used in the manufacture of countless gasket and insulation products, known for its adhesive bonding properties. Reference R3 woofers utalize an extended excursion polyurethane surround for it’s strength and flexible properities during extreme movement.
  • Back Plate & T-Yoke Venting
    Heat build-up is a leading cause of catastrophic woofer failure. Venting built into the T-Yoke, back plate, and voice coil extract and dissipate heat, ensuring R3 woofers keep their cool.

RMS Power (watts)800
Efficiency (1w/1m)84.66
Voice Coil Configuration2.5" DVC 2Ω
Mounting Depth6.875"
Optimum Sealed ft31.5
Optimum Ported ft32.25


Images for illustration purposes only, actual product may differ from image.
Information displayed is as received from manufacturer.
please call in or visit the store to confirm pricing and availability
E&OE
Reference R3 12″ Dual 2-ohm Subwoofer, 800w RMS
R3,249.99
Per Page      1 - 20 of 22